Amana NTW4516FW Use & Care Guide - Page 16
See Washer Care in Washer Maintenance.
View all Amana NTW4516FW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
Troubleshooting First try the solutions suggested here to possibly avoid a service call. If you experience Possible Causes Washer not performing as expected (cont.) Odors Monthly maintenance not done as recommended. Using too much detergent. Lid Locked light is flashing Single-dose laundry packet not dissolving The lid is not closed. A cycle was stopped or paused using START/STOP/PAUSE/ UNLOCK LID. Adding laundry packet incorrectly. Washer pumps out water Lid is left open for more than before finishing cycle 10 minutes. Solution See "Washer Care" in "Washer Maintenance." Unload washer as soon as cycle is complete. Be sure to measure correctly. Always follow the manufacturer's directions. See "Washer Care" section. Close the lid. The washer will not start or fill with the lid open. The washer may still be spinning. The lid will not unlock until the basket has stopped spinning. This may take several minutes if washing large loads or heavy fabrics. Be sure laundry packet is added to washer basket before adding clothes. Do not add packet to dispenser. Follow the manufacturer's instructions to avoid damage to your garments. Make sure lid is closed before starting a cycle and/or during prewash (soak). 16