Apple MA409LL/A Setup Guide - Page 15
the mounting screws finger tight.
UPC - 885909098316
View all Apple MA409LL/A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
 If you have a threaded-hole rack, start with the rail flanges outside the rack posts and compress the rail into position. Position the spacer over the threaded guide on the rail assembly. Compress the rails so that they fit on the outside of the rack posts. This end is up. Use either eight 10-32 or eight M5 screws (supplied), depending on which type your rack requires. 2 Slide a spacer, arrow up, over the small round guide at the ends of each rail and install the mounting screws finger tight. Note: Don't tighten the mounting screws until you align the rails in the next step. Chapter 1 Installing the Xserve 15
Chapter 1
Installing the Xserve
15
Â
If you have a threaded-hole rack, start with the rail flanges outside the rack posts and
compress the rail into position.
2
Slide a spacer, arrow up, over the small round guide at the ends of each rail and install
the mounting screws finger tight.
Note:
Don’t tighten the mounting screws until you align the rails in the next step.
Position the spacer
over the threaded guide
on the rail assembly.
This end is up.
Compress the rails
so that they fit on the
outside
of the rack posts.
Use either eight 10-32 or eight
M5 screws (supplied), depending on
which type your rack requires.