Arlo Safe User Manual - Page 9
Check the LED, Find a good location for your camera, Wall-mount your camera with the magnetic mount
View all Arlo Safe manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
Pro 4 Spotlight Camera Check the LED The camera LED lights when the camera is powered on. The LED changes color and blinks depending on the battery charge and to indicate the status of activities such as pairing the camera and updating the camera firmware. • Slow blinking blue. The camera is in the process of pairing with the SmartHub. • Fast blinking blue. The camera paired with the SmartHub. • Blinking amber. The camera is out of range, a connection error occurred during pairing, or the camera battery charge is low (15% or less). • Alternating blue and amber. The camera failed to pair with the SmartHub, or a firmware update is in process, or a reset is in process. Find a good location for your camera Select a location for your camera with a clear vantage point to fully optimize the wide field of view. For the best experience, choose a location with a strong WiFi signal. You can check the WiFi signal strength in the Arlo app. For information about WiFi connections, see WiFi connection options on page 19. Wall-mount your camera with the magnetic mount Your Pro 4 Spotlight Camera comes with a magnetic-based camera mount. The mount has a built in groove where you can hide your cable and provide strain relief if you want to keep the camera mounted and plugged into a wall source. To install a magnetic mount: 1. Select a location for the mount up to 6.5 feet (1.9 meters) high.* 2. Fasten the mouting screw into a wall. If you're working with drywall, use the plastic drywall anchor that we provide. Use the plastic stopper to help guide how far to screw it into the wall. *At 6.5 feet (2 meters) or higher, we recommend using the Arlo Outdoor Mount. Get Started 9 User Manual