Asus A7V-E Motherboard DIY Troubleshooting Guide - Page 32
ASUS A7V-E User's Manual, Wake-On-LAN Connector 3-pin WOL_CON, IMPORTANT, Wake-On-LAN, Wake-On-Ring
View all Asus A7V-E manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 32 highlights
01 01 01 01 3. HARDWARE SETUP 13) Wake-On-LAN Connector (3-pin WOL_CON) This connector connects to a LAN card with a Wake-On-LAN output, such as the ASUS PCI-L101 Ethernet card (see 7. Appendix). The connector powers up the system when a wakeup packet or signal is received through the LAN card. IMPORTANT: This feature requires that Wake-On-LAN features are enabled (see 4.4.3 Power Management) and that your system has an ATX power supply with at least 720mA +5V standby power. IMPORTANT: Requires an ATX power supply with at least 720mA +5 volt standby power WOL_CON ® A7V-E A7V-E Wake-On-LAN Connector Ground PME +5 Volt Standby 14) Wake-On-Ring Connector (2-pin WOR) This connector connects to internal modem cards with a Wake-On-Ring output. The connector powers up the system when a ringup packet or signal is received through the internal modem card. NOTE: For external modems, Wake-On-Ring is detected through the COM port. IMPORTANT: This feature requires that Wake-On-Ring features are enabled (see 4.4.3 Power Management) and that your system has an ATX power supply with at least 720mA +5V standby power. 3. H/W SETUP Connectors WOR Ring# Ground 21 ® A7V-E A7V-E Wake-On-Ring Connector 32 ASUS A7V-E User's Manual