Asus A7V133 A7V133 User Manual - Page 28

Expansion Cards - c drivers

Get Asus A7V133 PDF manuals and user guides View all Asus A7V133 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 28 highlights

3. HARDWARE SETUP 3.7 Expansion Cards WARNING! Unplug your power supply when adding or removing expansion cards or other system components. Failure to do so may cause severe damage to both your motherboard and expansion cards. 3.7.1 Expansion Card Installation Procedure 1. Read the documentation for your expansion card and make any necessary hardware or software settings for your expansion card, such as jumpers. 2. Remove your computer system's cover and the bracket plate on the slot you intend to use. Keep the bracket for possible future use. 3. Carefully align the card's connectors and press firmly. 4. Secure the card on the slot with the screw you removed above. 5. Replace the computer system's cover. 6. Set up the BIOS if necessary (such as IRQ xx Used By Legacy Drive: Yes in 4.4.3 PCI Configuration) 7. Install the necessary software drivers for your expansion card. 3. H/W SETUP CPU 28 ASUS A7V133 User's Manual

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
28
ASUS A7V133 User’s Manual
3. HARDWARE SETUP
CPU
3. H/W SETUP
3.7
Expansion Cards
WARNING!
Unplug your power supply when adding or removing expansion
cards or other system components. Failure to do so may cause severe damage to
both your motherboard and expansion cards.
3.7.1
Expansion Card Installation Procedure
1.
Read the documentation for your expansion card and make any necessary
hard-
ware or software settings for your expansion card, such as jumpers.
2.
Remove your computer system’s cover and the bracket plate on the slot you
intend to use. Keep the bracket for possible future use.
3.
Carefully align the card’s connectors and press firmly.
4.
Secure the card on the slot with the screw you removed above.
5.
Replace the computer system’s cover.
6.
Set up the BIOS if necessary
(such as
IRQ xx Used By Legacy Drive: Yes
in
4.4.3 PCI Configuration
)
7.
Install the necessary software drivers for your expansion card.