Asus AT5IONT-I AT5IONT-I User's manual - Page 20
AT5IONT-I DELUXE fan connectors
View all Asus AT5IONT-I manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
3. USB connector (10-1 pin USB56) This connector is for a USB 2.0 port. Connect the USB module cable to this connector, then install the module to a slot opening at the back of the system chassis. This USB connector complys with USB 2.0 specification that supports up to 480 Mbps connection speed. USB56 AT5IONT-I DELUXE PIN 1 AT5IONT-I DELUXE USB2.0 connector Never connect a 1394 cable to the USB connector. Doing so will damage the motherboard! The USB module cable is purchased separately. 4. CPU, power, and chassis fan connectors (3-pin CPU_FAN, 3-pin PWR_FAN, 3-pin CHA_FAN) Connect the fan cables to the fan connectors on the motherboard, ensuring that the black wire of each cable matches the ground pin of the connector. Insufficient air flow inside the system may damage the motherboard components. These are not jumpers! Do not place jumper caps on the fan connectors! CPU_FAN PWR_FAN Rotation +12V GND Rotation +12V GND CHA_FAN AT5IONT-I DELUXE GND +12V Rotation AT5IONT-I DELUXE fan connectors 1-11 Chapter 1: Product introduction