Asus CUSL2 CUSL2 User Manual - Page 20

Onboard Audio CODEC Setting ADN - m motherboard

Get Asus CUSL2 PDF manuals and user guides View all Asus CUSL2 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 20 highlights

3. HARDWARE SETUP 3) Onboard Audio CODEC Setting (ADN#) (available on audio model only) The onboard audio CODEC may be enabled or disabled using all of these jump- ers. Disable the onboard audio CODEC if you are using an ISA or PCI audio card on any of the expansion slots or a primary audio/modem CNR on a CNR slot (see CNR Slot later in this section). If using a PCI audio expansion card, Onboard AC97 Audio Controller in 4.4.2 I/O Device Configuration must also be disabled. Setting ADN# Enable [1-2] (default) Disable [2-3] ADN# ADN# 3. H/W SETUP Motherboard Settings 3 2 2 1 Enable Disable ® (Default) CUSL2 CUSL2 Audio Codec Setting 4) Keyboard Power Up (KBPWR) This allows you to disable or enable the keyboard power up function. Set this jumper to Enable if you wish to use your keyboard (by pressing ) to power up your computer. This feature requires an ATX power supply that can supply at least 300mA on the +5VSB lead. The default is set to Disable because not all computers have the appropriate ATX power supply. Your computer will not power ON if you set this to Enable but do not have the appropriate ATX power supply. NOTE: This jumper must be set in conjunction with Wake On PS2 KB/ PS2 Mouse/CIR in 4.5.1 Power Up Control. Setting KBPWR Enable [1-2] (default) Disable [2-3] KBPWR 12 23 Enable Disable ® CUSL2 CUSL2 Keyboard Power Setting 20 ASUS CUSL2 User's Manual

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
ASUS CUSL2 User’s Manual
3. HARDWARE SETUP
20
Motherboard Settings
3. H/W SETUP
3)
Onboard Audio CODEC Setting (ADN#)
(available on audio model only)
The onboard audio CODEC may be enabled or disabled using all of these jump-
ers. Disable the onboard audio CODEC if you are using an ISA or PCI audio
card on any of the expansion slots or a primary audio/modem CNR on a CNR
slot (see CNR Slot later in this section). If using a PCI audio expansion card,
Onboard AC97 Audio Controller
in
4.4.2 I/O Device Configuration
must
also be disabled.
Setting
ADN#
Enable
[1-2] (default)
Disable
[2-3]
CUSL2 Audio Codec Setting
Disable
Enable
(Default)
1
2
2
3
ADN#
ADN#
CUSL2
4)
Keyboard Power Up (KBPWR)
This allows you to disable or enable the keyboard power up function. Set this
jumper to
Enable
if you wish to use your keyboard (by pressing <Spacebar>) to
power up your computer. This feature requires an ATX power supply that can
supply at least 300mA on the +5VSB lead. The default is set to
Disable
because
not all computers have the appropriate ATX power supply. Your computer will not
power ON if you set this to
Enable
but do not have the appropriate ATX power
supply.
NOTE:
This jumper must be set in conjunction with
Wake On PS2 KB/
PS2 Mouse/CIR
in
4.5.1 Power Up Control
.
Setting
KBPWR
Enable
[1-2] (default)
Disable
[2-3]
CUSL2 Keyboard Power Setting
Enable
Disable
12
23
KBPWR
CUSL2