Asus CUSL2 CUSL2 User Manual - Page 39
ASUS CUSL2 User's Manual, Wake-On-LAN Connector 3-pin WOL_CON, Wake On LAN or PCI Modem, Wake-On-
View all Asus CUSL2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 39 highlights
3. HARDWARE SETUP 20) Wake-On-LAN Connector (3-pin WOL_CON) This connector connects to a LAN card with a Wake-On-LAN output, such as the ASUS PCI-L101 Ethernet card (see 7. Appendix). The connector powers up the system when a wakeup packet or signal is received through the LAN card. IMPORTANT: This feature requires that Wake On LAN or PCI Modem is enabled (see 4.5.1 Power Up Control) and that your system has an ATX power supply with at least 720mA +5V standby power. IMPORTANT: Requires an ATX power supply with at least 720mA +5 volt standby power WOL_CON ® +5 Volt Standby PME CUSL2 CUSL2 Wake-On-LAN Connector Ground 21) Wake-On-Ring Connector (2-pin WOR_CON) This connector connects to internal modem cards with a Wake-On-Ring output. The connector powers up the system when a ringup packet or signal is received through the internal modem card. NOTE: For external modems, Wake-On-Ring is detected through the COM port. IMPORTANT: This feature requires that Wake On LAN or PCI Modem is enabled (see 4.5.1 Power Up Control) and that your system has an ATX power supply with at least 720mA +5V standby power. 3. H/W SETUP Connectors WOR_CON ® CUSL2 CUSL2 Wake-On-Ring Connector Ring# Ground 2 1 ASUS CUSL2 User's Manual 39