Asus HX97 User Manual - Page 13
Jumper Settings
View all Asus HX97 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
III. INSTALLATION Jumper Settings 1. Flash ROM Boot Block Programming (BBLKW) This sets the operation mode of the boot block area of the Programmable Flash ROM to allow programming in the Enabled position. This is required only if prompted by the Flash Memory Writer Utility as shown in BIOS SOFTWARE. Programming BBLKW Disabled [1-2] (Default) Enabled [2-3] R BBLKW 1 2 3 Disabled / Protected (Default) BBLKW 1 2 3 Enabled Boot Block Programming (Disable / Enable) III. INSTALLATION (Jumpers) ASUS HX97 User's Manual 13
ASUS HX97 User’s Manual
13
III. INSTALLATION
Jumper Settings
1.
Flash ROM Boot Block Programming (BBLKW)
This sets the operation mode of the boot block area of the Programmable Flash
ROM to allow programming in the
Enabled
position.
This is required only if
prompted by the
Flash Memory Writer Utility
as shown in BIOS SOFTWARE.
Pr
ogramming
BBLKW
Disabled
[1-2]
(Default)
Enabled
[2-3]
Boot Block Programming (Disable / Enable)
Disabled / Protected
(Default)
Enabled
1
2
3
BBLKW
1
2
3
BBLKW
(Jumpers)
III.
INSTALLATION