Asus HX97 User Manual - Page 14

Installation

Get Asus HX97 PDF manuals and user guides View all Asus HX97 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 14 highlights

III. INSTALLATION 2. Real Time Clock (RTC) RAM The CMOS RAM is powered by the onboard button cell battery. To clear the RTC data: (1) Turn off your computer, (2) Short the two pads (Labeled: SHORT HERE TO CLEAR CMOS) momentarily with a metallic object (3) Turn on your computer, (4) Hold down during bootup and enter BIOS setup to reenter user preferences. Battery Test Jumper (For Service Use Only) You can test the battery's current by removing this jumper and attaching a current meter to the pins. WARNING: You must unplug the power cord to your power supply to ensure that there is no power to your motherboard. The CMOS RAM containing BIOS setup information may be cleared by this action. You should enter BIOS to "Load Setup Defaults" and re-enter any user information after removing and reapplying this jumper. RTC RAM Operation Clear Data RTCLR [2-3] (Default) [1-2] (momentarily) BAT Battery Test Operation Test Mode (Default) Short the solder points to Clear (This is not a jumper) RTC RAM Clear R III. INSTALLATION (Jumpers) 14 ASUS HX97 User's Manual

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
14
ASUS HX97 User’s Manual
2.
Real Time Clock (RTC) RAM
The CMOS RAM is powered by the onboard button cell battery.
To clear the
RTC data: (1) Turn off your computer, (2) Short the two pads (Labeled: SHORT
HERE TO CLEAR CMOS) momentarily with a metallic object (3) Turn on your
computer, (4) Hold down <Delete> during bootup and enter BIOS setup to re-
enter user preferences.
Battery Test Jumper (For Service Use Only)
You can test the battery’s current by removing this jumper and attaching a cur-
rent meter to the pins.
WARNING:
You must unplug the power cord to your
power supply to ensure that there is no power to your motherboard.
The
CMOS RAM containing BIOS setup information
may
be cleared by this
action.
You
should
enter BIOS to “Load Setup Defaults” and re-enter any
user information after removing and reapplying this jumper.
R
TC RAM
R
TCLR
Operation
[2-3]
(Default)
Clear Data
[1-2]
(momentarily)
Battery Test
Test Mode
Operation
(Default)
BAT
RTC RAM Clear
Short the solder points to Clear
(This is not a jumper)
III. INSTALLATION
(Jumpers)
III.
INSTALLATION