Asus KFN5-Q User Guide - Page 121
Silicon Image RAID configurations
UPC - 610839149490
View all Asus KFN5-Q manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 121 highlights
5.3 Silicon Image RAID configurations The Silicon Image Sil3132 RAID controller supports RAID 0 and RAID 1 configurations. Use the Silicon Image RAID utility to configure a disk array. 5.3.1 Setting the BIOS RAID items After installing the hard disk drives, make sure to set the necessary RAID items in the BIOS before setting your RAID configuration. To set the BIOS RAID items: 1. Boot the system and press during the Power-On Self-Test (POST) to enter the BIOS Setup Utility. 2. From the Advanced > Onboard Devices Configuration menu item in the BIOS set the Onboard Sil3132 SATALink item to RAID Mode and set the Onboard Serial-ATA BOOTROM item to Enabled. See section "4.4.5 Onboard Devices Configuration" for details. 3. Save your changes and Exit Setup. Launching the Silicon Image Array Management Software Launch the Silicon Image Array Management software from Windows® XP by clicking the Start button and selecting All Programs > Silicon Image > Sam For details on the Silicon Image SATARaid™ RAID configuration, refer to the "Sil3132 User's Manual" in your motherboard support CD: \Drivers\Sil3132\Raid\SATARAID5-UserGuide_v1.40.pdf ASUS KFN5-D SLI 5-11