Asus KN97-X User Manual - Page 15
Jumper Settings
View all Asus KN97-X manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
III. INSTALLATION (Jumpers) III. INSTALLATION Jumper Settings 1. Onboard Multi-I/O Selection (IOEN) You can selectively disable each onboard Multi-I/O item (floppy, serial, parallel, and IrDA) through Chipset Features Setup of BIOS SOFTWARE or disable all Multi-I/O items at once with the following jumper in order to use your own Multi-I/O card. Multi-I/O Enable Disable IOEN [1-2] (Default) [2-3] R R IOEN 123 Enable (Default) IOEN 123 Disabled Multi I/O Setting (Enable / Disable) 2. Flash ROM Boot Block Programming (BBLKW) This sets the operation mode of the boot block area of the Programmable Flash ROM to allow programming in the Enabled position. This is required only if prompted by the Flash Memory Writer Utility as shown in BIOS SOFTWARE. Programming Disabled/Protect Enabled BBLKW [1-2] (Default) [2-3] BBLKW 123 Disabled / Protected (Default) BBLKW 123 Enabled / Program Boot Block Programming (Disable / Enable) ASUS KN97-X User's Manual 15