Asus M4A785G HTPC RC User Manual - Page 34
RCA Out port left-channel., USB 2.0 ports 1 and 2., External SATA port., IEEE 1394a port., DVI-I Out - htpc rc
View all Asus M4A785G HTPC RC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 34 highlights
11. Side Speaker Out port (gray). This port connects the side speakers in an 8-channel or 10-channel audio configurations. Refer to the audio configuration table below for the function of the audio ports in 2, 4, 6, 8, or 10-channel configuration. Audio 2, 4, 6, 8, or 10-channel configuration Port Headset 2-channel 4-channel 6-channel Light Blue Line In Line In Line In Lime Pink Orange Black Gray Line Out Mic In - - - Front Speaker Out Mic In - Rear Speaker Out - Front Speaker Out Mic In Center/Subwoofer Rear Speaker Ou - 8-channel Line In Front Speaker Out Mic In Center/Subwoofer Rear Speaker Out Side Speaker Out 10-channel Additional Side Speaker Out Front Speaker Out Mic In Center/Subwoofer Rear Speaker Out Side Speaker Out 12. RCA Out port (left-channel). This port connects a receiver or an amplifier via an RCA cable. 13. USB 2.0 ports 1 and 2. These two 4-pin Universal Serial Bus (USB) ports are available for connecting USB 2.0 devices. • For RC edition, connect the IR receiver to USB 2.0 port 1 or 2 which supports with power-on function. The power-on function follows the behavior of the system sleep button which can be customized in Windows® Control Panel. • To disable the power-on function for USB 2.0 port 1 or 2, set the Power on By USB Port 1/2 item to [Disabled] in the BIOS. When the Power on By USB Port 1/2 item is set to [Enabled], connecting/disconnecting the USB devices to/from these two ports will power on the system. Refer to page 2-17 for details. 14. External SATA port. This port connects an external Serial ATA hard disk drive. • The external SATA port supports external Serial ATA 3.0 Gb/s devices. Longer cables support higher power requirements to deliver signal up to two meters away, and enables improved hot-swap function. • Before using the External SATA port, ensure to set the OnChip SATA Type in the BIOS settings to [AHCI] and install the AHCI driver. DO NOT insert a different connector to this port. 15. IEEE 1394a port. This 6-pin IEEE 1394a port provides high-speed connectivity for audio/video devices, storage peripherals, PCs, or portable devices. 16. DVI-I Out port. This port is for any DVI-I compatible device and are HDCP compliant, allowing playback of HD DVD, Blu-Ray and other protected content. 17. HDMI Out port. This port is for a high-definition multimedia interface (HDMI) connector. 1-22 ASUS M4A785G HTPC Series