Asus MAXIMUS VIII IMPACT MAXIMUS VIII IMPACT Users manual English - Page 118
CPU Fan Profile [Standard], Chassis Fan 1 Q-Fan Control [DC Mode], CPU Fan Max. Duty Cycle % [100]
View all Asus MAXIMUS VIII IMPACT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 118 highlights
CPU Fan Profile [Standard] This item allows you to set the appropriate performance level of the CPU fan. [Standard] Set to make the CPU fan adjust automatically depending on the CPU temperature. [Silent] Set to minimize the fan speed for quiet CPU fan operation. [Turbo] Set to achieve maximum CPU fan speed. [Manual] Set to assign the detailed fan speed control parameters. The following items appear only when you set the CPU Fan Profile to [Manual]. CPU Upper Temperature [70] Use the or keys to adjust the upper limit of the CPU temperature. The values range from 45 to 75. CPU Fan Max. Duty Cycle (%) [100] Use the or keys to adjust the maximum CPU fan duty cycle. The values range from 60% to 100%. When the CPU temperature reaches the upper limit, the CPU fan will operate at the maximum duty cycle. CPU Middle Temperature [45] Use the or keys to adjust the middle limit of the CPU temperature. The values range from 40 to 75. CPU Fan Middle. Duty Cycle (%) [60] Use the or keys to adjust the middle CPU fan duty cycle. The values range from 60% to 100%. When the CPU temperature reaches the middle limit, the CPU fan will operate at the middle duty cycle. CPU Lower Temperature [40] Use the or keys to adjust the lower limit of the CPU temperature. The values range from 0 to 75. The CPU fan will operate at the minimum duty cycle when the temperature is lower than the limit. CPU Fan Min. Duty Cycle(%) [60] Use the or keys to adjust the minimum CPU fan duty cycle. The values range from 0% to 100%. When the CPU temperature is under the limit, the CPU fan will operate at the minimum duty cycle. Chassis Fan 1 Q-Fan Control [DC Mode] [Disabled] Disable the Chassis Q-Fan control feature. [DC mode] Enable the Chassis Q-Fan control in DC mode for 3-pin chassis fan. [PWM mode] Enable the Chassis Q-Fan control in PWM mode for 4-pin chassis fan. Chassis Fan 1 Q-Fan Source [CPU] The assignment fan will be controlled according to the selected temperature source. Configuration options: [CPU] [MotherBoard] [PCH] [T_SENSOR1] [EXT_Sensor1] [EXT_Sensor2] [EXT_Sensor3] For EXT_Sensor1-3, connect a Thermistor cable to the EXT_TS1-3 header then place the other end to the component to get the temperature. Chapter 3 3-38 Chapter 3: BIOS Setup