Asus MAXIMUS VIII IMPACT MAXIMUS VIII IMPACT Users manual English - Page 97

CPU Graphics Power Phase Control [Auto] This item allows you to set the power phase control of the CPU Graphics. Configuration options: [Auto] [Standard] [Optimized] [Extreme] [Power Phase Response] DO NOT remove the thermal module when setting this item to [Extreme] or [Power Phase Response]. The thermal conditions should be monitored. DRAM Current Capability [100%] This item allows you to set the shut-off current limit for the external DRAM voltage regulator. Configuration options: [100%] [110%] [120%] [130%] DRAM Power Phase Control [Extreme] This item allows you to set the power phase control of the external DRAM voltage regulator. Configuration options: [Optimized] [Extreme] DRAM Switching Frequency [Auto] This item allows you to set the VRM switching frequency. Configuration options: [Auto] [Manual] The following item appears only when you set the DRAM Switching Frequency to [Manual]. Fixed DRAM Switching Frequency (KHz) [300] This item allows you to configure a higher frequency to increase the overclocking range or a lower frequency to enhance the system stability. Use the or to adjust the value. The values range from 300 KHz to 500 KHz with an interval of 50 KHz. Boot Voltages CPU Core/Cache Boot Voltage [Auto] The voltage for CPU at initial boot. Configuration options: [Auto] [0.600] - [1.700] DMI Boot Voltage [Auto] The voltage for DMI at initial boot. Configuration options: [Auto] [0.300] - [1.900] Core PLL Boot Voltage [Auto] The voltage for Core PLL at initial boot. Configuration options: [Auto] [0.70000] - [1.60000] CPU System Agent Boot Voltage [Auto] The voltage for CPU System Agent at initial boot. Configuration options: [Auto] [0.7000] - [1.8000] CPU VCCIO Boot Voltage [Auto] The voltage for CPU VCCIO at initial boot. Configuration options: [Auto] [0.7000] - [1.8000] Chapter 3 ASUS MAXIMUS VIII IMPACT 3-17