Asus P2B-LS P2B-LS User Manual - Page 22
ASUS P2B-L/P2B-S/P2B-LS User's Manual, Secure the SEC Cartridge, Secure the Heatsink, Connect
View all Asus P2B-LS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
III. INSTALLATION 4. Secure the SEC Cartridge: Secure the SEC cartridge in place by pushing the SEC cartridge locks outward so that the lock shows through the retention mechanism's lock holes. (3) (3) 5. Secure the Heatsink: Install the heatsink support base into the motherboard. This is not, however, necessary if you use a heatsink with fan (see next page). The support base is necessary to secure the heatsink (without fan). Secure the heatsink by sliding the heatsink support top bar into the bottom groove of the heatsink until it locks into the heatsink support base posts. (9) (8) R III. INSTALLATION CPU Heatsink support top bar (4) Heatsink support base (7) Heatsink support base post 6. Connect the Heat Sensor Cable to TRCPU (optional): If you purchased the specially designed fan and thermal monitor heatsink, you can connect the heat sensor cable to the motherboard's CPU heat sensor connector (TRCPU). TRCPU P2B-L/S/LS CPU Thermal Sensor 22 ASUS P2B-L/P2B-S/P2B-LS User's Manual