Asus P3W P3W User Manual - Page 40
ASUS P3W User's Manual, Wake-On-LAN Connector 3-pin WOL_CON, Wake On LAN, Wake-On-Ring Connector 2-
View all Asus P3W manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 40 highlights
3. HARDWARE SETUP 13) Wake-On-LAN Connector (3-pin WOL_CON) This connector connects to a LAN card with a Wake-On-LAN output, such as the ASUS PCI-L101 Ethernet card. The connector powers up the system when a wakeup packet or signal is received through the LAN card. IMPORTANT: This feature requires that Wake On LAN is set to Enabled (see 4.5.1 Power Up Control) and that your system has an ATX power supply with at least 720mA +5V standby power. 01 01 1 IMPORTANT: Requires an ATX power supply with at least 720mA +5 volt standby power P3W ® P3W Wake-On-LAN Connector Ground PME +5 Volt Standby WOL_CON 14) Wake-On-Ring Connector (2-pin WOR) This connector connects to internal modem cards with a Wake-On-Ring output. The connector powers up the system when a ringup packet or signal is received through the internal modem card. NOTE: For external modems, Wake-On-Ring is detected through the COM port. IMPORTANT: This feature requires that PWR Up On Modem Act is set to Enabled (see 4.5.1 Power Up Control). 3. H/W SETUP Connectors 01 01 1 P3W ® 12 Ground RI# WOR P3W Wake-On-Ring Connector 40 ASUS P3W User's Manual