Asus P5Q SE R User Manual - Page 37
Memory configurations - p5q se overclocking
View all Asus P5Q SE R manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 37 highlights
2.4.2 Memory configurations You may install 512 MB, 1 GB, 2 GB, and 4 GB unbuffered non‑ECC DDR2 DIMMs into the DIMM sockets. Recommended Memory Configurations • You may install varying memory sizes in Channel A and Channel B. The system maps the total size of the lower-sized channel for the dual-channel configuration. Any excess memory from the higher-sized channel is then mapped for single-channel operation. • It is recommended to install the memory modules from the yellow slots for better overclocking capability. • Always install DIMMs with the same CAS latency. For optimum compatibility, it is recommended that you obtain memory modules from the same vendor. • When installing total memory of 4GB capacity or more, Windows® 32-bit operation system may only recognize less than 3GB. Hence, a total installed memory of less than 3GB is recommended. • This motherboard does not support memory modules made up of 128 Mb chips. • Due to chipset limitation, this motherboard can support up to 16 GB on the operating systems listed below. You may install a maximum of 4 GB DIMMs on each slot. 64-bit Windows® XP Professional x64 Edition Windows® Vista x64 Edition • The default memory operation frequency is dependent on its SPD. Under the default state, some memory modules for overclocking may operate at a lower frequency than he vendor-marked value. To operate at the vendormarked or at a higher frequency, see section 4.4 Ai Tweaker menu for manual memory frequency adjustment. • The memory modules may require a better cooling system to work stably under full loading (4 DIMMs) or overclocking setting. ASUS P5Q SE/R 2-13