Home » Asus Manuals » Motherboards » Asus P5Q SE R » Manual Viewer

Asus P5Q SE R User Manual - Page 80

Ai Tweaker menu

Add to My Manuals
Save this manual to your list of manuals

Page 80 highlights

4.4 Ai Tweaker menu The Ai Tweaker menu items allow you to change the settings for system performance. Main Ai Tweaker BIOS SETUP UTILITY Advanced Power Boot Configure System Performance Settings Ai Overclock Tuner [Auto] FSB Strap to North Bridge [Auto] DRAM Frequency [Auto] DRAM Timing Control [Auto] 1st Information: 5-5-5-15-3-36-5-3 2nd Information: 8-3-5-4-6-4-6 3rd Information: 13-5-1-5-5 DRAM Static Read Control [Auto] DRAM Read Traning [Auto] MEM. OC Charger [Auto] Ai Clock Twister [Auto] Ai Transaction Booster [Auto] C/P: A1 A2 A3 A4 LUL: 09 09 09 09 ********* Please key in numbers directly!********** CPU Voltage [Auto] FSB Termination voltage [Auto] Memory Voltage [Auto] North Bridge Voltage [Auto] South Bridge Voltage [Auto] Load-Line Calibration [Auto] CPU GTL REference [Auto] CPU Spread Sepctrum [Auto] PCIE Spread Sprectrum [Auto] Tools Exit Options MANUAL AUTO Select Screen Select Item +- Change Field Tab Select Field F1 General Help F10 Save and Exit ESC Exit v02.61 (C)Copyright 1985-2008, American Megatrends, Inc. 4.4.1 Ai Overclock Tuner [Auto] Allows selection of CPU overclocking options to achieve desired CPU internal frequency. Select either one of the preset overclocking configuration options: Manual Auto Allows you to individually set overclocking parameters. Loads the optimal settings for the system. The following two items appear only when you set the Ai Overclock Tuner item to [Manual]. FSB Frequency [XXX] Displays the frequency sent by the clock generator to the system bus and PCI bus. The value of this item is auto-detected by the BIOS. Use the and keys to adjust the FSB frequency. You can also type the desired CPU frequency using the numeric keypad. The values range from 200 to 800. Refer to the table below for the correct Front Side Bus and CPU External Frequency settings. 4-16 Chapter 4: BIOS setup

Section	Page
Contents	3
Notices	8
Safety information	9
About this guide	10
P5Q SE/R specifications summary	12
Chapter 1: Product introduction	15
1.1 Welcome!	17
1.2 Package contents	17
1.3 Special features	18
1.3.1 Product highlights	18
1.3.2 ASUS unique features	19
1.3.3 ASUS Stylish features	21
1.3.4 ASUS Intelligent Overclocking features	21
Chapter 2: Hardware information	23
2.1 Before you proceed	25
2.2 Motherboard overview	26
2.2.1 Placement direction	26
2.2.2 Screw holes	26
2.2.3 Motherboard layout	27
2.2.4 Layout contents	28
2.3 Central Processing Unit (CPU)	30
2.3.1 Installing the CPU	31
2.3.2 Installing the CPU heatsink and fan	34
2.3.3 Uninstalling the CPU heatsink and fan	35
2.4 System memory	36
2.4.1 Overview	36
2.4.2 Memory configurations	37
2.4.3 Installing a DIMM	41
2.4.4 Removing a DIMM	41
2.5 Expansion slots	42
2.5.1 Installing an expansion card	42
2.5.2 Configuring an expansion card	42
2.5.3 Interrupt assignments	43
2.5.4 PCI slots	44
2.5.5 PCI Express x1 slots	44
2.5.6 PCI Express 2.0 x16 slot	44
2.6 Jumpers	45
2.7 Connectors	47
2.7.1 Rear panel connectors	47
2.7.2 Internal connectors	48
Chapter 3: Powering up	59
3.1 Starting up for the first time	61
3.2 Turning off the computer	62
3.2.1 Using the OS shut down function	62
3.2.2 Using the dual function power switch	62
Chapter 4: BIOS setup	63
4.1 Managing and updating your BIOS	65
4.1.1 ASUS Update utility	65
4.1.2 Creating a bootable floppy disk	68
4.1.3 ASUS EZ Flash 2 utility	69
4.1.4 AFUDOS utility	70
4.1.5 ASUS CrashFree BIOS 3 utility	72
4.2 BIOS setup program	73
4.2.1 BIOS menu screen	74
4.2.2 Menu bar	74
4.2.3 Navigation keys	74
4.2.4 Menu items	75
4.2.5 Sub-menu items	75
4.2.6 Configuration fields	75
4.2.7 Pop-up window	75
4.2.8 Scroll bar	75
4.2.9 General help	75
4.3 Main menu	76
4.3.1 System Time [xx:xx:xx]	76
4.3.2 System Date [Day xx/xx/xxxx]	76
4.3.3 Legacy Diskette A [1.44M, 3.5 in.]	76
4.3.4 SATA 1~6	77
4.3.5 Storage Configuration	78
4.3.6 System Information	79
4.4 Ai Tweaker menu	80
4.4.1 Ai Overclock Tuner [Auto]	80
4.4.2 FSB Strap to North Bridge [Auto]	81
4.4.3 DRAM Frequency [Auto]	81
4.4.4 DRAM Timing Control [Auto]	81
4.4.5 DRAM Static Read Control [Auto]	83
4.4.6 DRAM Read Training [Auto]	83
4.4.7 MEM. OC Charger [Auto]	83
4.4.8 Ai Clock Twister [Auto]	83
4.4.9 Ai Transaction Booster [Auto]	84
4.4.10 CPU Voltage [Auto]	84
4.4.11 FSB Termination Voltage [Auto]	84
4.4.12 Memory Voltage [Auto]	84
4.4.13 North Bridge Voltage [Auto]	84
4.4.14 South Bridge Voltage [Auto]	85
4.4.15 Load-Line Calibration [Auto]	85
4.4.16 CPU GTL Reference [Auto]	85
4.4.17 CPU Spread Spectrum [Auto]	85
4.4.18 PCIE Spread Spectrum [Auto]	85
4.5 Advanced menu	86
4.5.1 Trusted Computing	86
4.5.2 CPU Configuration	87
4.5.3 Chipset	89
4.5.4 OnBoard Devices Configuration	90
4.5.5 USB Configuration	91
4.5.6 PCI PnP	92
4.6 Power menu	93
4.6.1 Suspend Mode [Auto]	93
4.6.2 ACPI 2.0 Support [Disabled]	93
4.6.3 ACPI APIC Support [Enabled]	93
4.6.4 APM Configuration	94
4.6.5 Hardware Monitor	95
4.7 Boot menu	97
4.7.1 Boot Device Priority	97
4.7.2 Boot Settings Configuration	98
4.7.3 Security	99
4.8 Tools menu	101
4.8.1 ASUS EZ Flash 2	101
4.8.2 Express Gate [Enabled]	102
4.8.3 AI NET 2	102
4.8.4 ASUS O.C. Profile	103
4.9 Exit menu	104
Chapter 5: Software support	105
5.1 Installing an operating system	107
5.2 Support DVD information	107
5.2.1 Running the support DVD	107
5.2.2 Drivers menu	108
5.2.3 Utilities menu	109
5.2.4 Make Disk menu	111
5.2.5 Manual menu	112
5.2.6 ASUS Contact information	112
5.2.7 Other information	113
5.3 Software information	115
5.3.1 ASUS MyLogo2™	115
5.3.2 Audio configurations	117
5.3.3 ASUS PC Probe II	121
5.3.4 ASUS AI Suite	127
5.3.5 ASUS AI Booster	129
5.3.6 ASUS AI Nap	130
5.3.7 ASUS Fan Xpert	131
5.3.8 ASUS EPU-4 Engine	132
5.3.9 ASUS Express Gate	136
5.4 RAID configurations	145
5.4.1 RAID definitions	145
5.4.2 Installing Serial ATA hard disks	146
5.4.3 Intel® RAID configurations	146
5.5 Creating a RAID driver disk	154
5.5.1 Creating a RAID driver disk without entering the OS	154
5.5.2 Creating a RAID/SATA driver disk in Windows®	154
Appendix: CPU features	157
A.1 Intel® EM64T	159
Using the Intel® EM64T feature	159
A.2 Enhanced Intel SpeedStep® Technology (EIST)	159
A.2.1 System requirements	159
A.2.2 Using the EIST	160
A.3 Intel® Hyper-Threading Technology	161

Match case Limit results 1 per page

4-16

Chapter 4: BIOS setup

4.4

Ai Tweaker menu

The Ai Tweaker menu items allow you to change the settings for system

performance.

Select Screen

Select Item

Change Field

Tab

Select Field

General Help

F10

Save and Exit

ESC

Exit

BIOS SETUP UTILITY

Main

Ai Tweaker

Advanced

Power

Boot

Tools

Exit

Conﬁgure System Performance Settings

Ai Overclock Tuner

[Auto]

FSB Strap to North Bridge

[Auto]

DRAM Frequency

[Auto]

DRAM Timing Control

[Auto]

1st Information: 5-5-5-15-3-36-5-3

2nd Information: 8-3-5-4-6-4-6

3rd Information: 13-5-1-5-5

DRAM Static Read Control

[Auto]

DRAM Read Traning

[Auto]

MEM. OC Charger

[Auto]

Ai Clock Twister

[Auto]

Ai Transaction Booster

[Auto]

C/P: A1 A2 A3 A4

LUL: 09 09 09 09

********* Please key in numbers directly!**********

CPU Voltage

[Auto]

FSB Termination voltage

[Auto]

Memory Voltage

[Auto]

North Bridge Voltage

[Auto]

South Bridge Voltage

[Auto]

**************************************************

Load-Line Calibration

[Auto]

CPU GTL REference

[Auto]

CPU Spread Sepctrum

[Auto]

PCIE Spread Sprectrum

[Auto]

Options

MANUAL

AUTO

4.4.1

Ai Overclock Tuner [Auto]

Allows selection of CPU overclocking options to achieve desired CPU internal

frequency. Select either one of the preset overclocking conﬁguration options:

Manual

Allows you to individually set overclocking parameters.

Auto

Loads the optimal settings for the system.

The following two items appear only when you set the

Ai Overclock Tuner

item

to [Manual].

FSB Frequency [XXX]

Displays the frequency sent by the clock generator to the system bus and PCI bus.

The value of this item is auto-detected by the BIOS. Use the <+> and <-> keys to

adjust the FSB frequency. You can also type the desired CPU frequency using the

numeric keypad. The values range from 200 to 800. Refer to the table below for

the correct Front Side Bus and CPU External Frequency settings.