Asus P5WD2-E Premium P5WD2-E Premium User's Manual for English Edition - Page 56
Internal connectors
View all Asus P5WD2-E Premium manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 56 highlights
P5WD2-E 2.7.2 Internal connectors 1 . Floppy disk drive connector (34-1 pin FLOPPY) This connector is for the provided floppy disk drive (FDD) signal cable. Insert one end of the cable to this connector, then connect the other end to the signal connector at the back of the floppy disk drive. Pin 5 on the connector is removed to prevent incorrect cable connection when using a FDD cable with a covered Pin 5. FLOPPY NOTE: Orient the red markings on the floppy ribbon cable to PIN 1. ® PIN 1 P5WD2-E PREMIUM Floppy Disk Drive Connector 2 . Marvell IDE connector (40-1 pin PRI_EIDE [red]) This connector is for Ultra ATA 133/100/66 signal cables. The Marvell® IDE connectors support up to two IDE hard disk drives for easier data storage. PRI_EIDE ® PIN 1 NOTE: Orient the red markings (usually zigzag) on the IDE ribbon cable to PIN 1. P5WD2-E PREMIUM RAID Connector The connectors do not support ATAPI devices. P5WD2-E 2-28 Chapter 2: Hardware information