Asus P5WD2-E Premium P5WD2-E Premium User's Manual for English Edition - Page 57
P5WD2-E PREMIUM IDE Connector
View all Asus P5WD2-E Premium manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 57 highlights
3 . ICH7R Primary IDE connector (40-1 pin PRI_IDE) This connector is for an Ultra DMA 100/66 signal cable. The Ultra DMA 100/66 signal cable has three connectors: a blue connector for the primary IDE connector on the motherboard, a black connector for an Ultra DMA 100/66 IDE slave device (optical drive/hard disk drive), and a gray connector for an Ultra DMA 100/66 IDE master device (hard disk drive). If you install two hard disk drives, you must configure the second drive as a slave device by setting its jumper accordingly. Refer to the hard disk documentation for the jumper settings. • Pin 20 on the IDE connector is removed to match the covered hole on the Ultra DMA cable connector. This prevents incorrect insertion when you connect the IDE cable. • Use the 80-conductor IDE cable for Ultra DMA 100/66 IDE devices. P5WD2-E PRI_IDE ® P5WD2-E PREMIUM IDE Connector NOTE: Orient the red markings (usually zigzag) on the IDE ribbon cable to PIN 1. ASUS P5WD2-E Premium 2-29