Asus P8H61-M LE CSM User Manual - Page 35

6. These connectors connect to Serial ATA 3.0 Gb/s hard disk drives and optical drives via Serial ATA 3.0 Gb/s signal cables. SATA3G_2 SATA3G_1 Intel® H61 Serial ATA 3.0Gb/s connectors (7-pin SATA3G_1~4) GND RSATA_TXP2 RSATA_TXN2 GND RSATA_RXP2 RSATA_RXN2 GND SATA3G_4 GND RSATA_RXN4 RSATA_RXP4 GND RSATA_TXN4 RSATA_TXP4 GND P8H61-M LE/USB3 SATA3G_3 GND RSATA_RXN3 RSATA_RXP3 GND RSATA_TXN3 RSATA_TXP3 GND P8H61-M LE/USB3 SATA connectors • You must install Windows® XP Service Pack 3 or later version before using Serial ATA hard disk drives. • When using hot-plug and NCQ, set the SATA Mode item in the BIOS to [AHCI Mode]. See section 2.5.4 SATA Configuration for details. 7. These connectors are for USB 2.0 ports. Connect the USB module cable to any of these connectors, then install the module to a slot opening at the back of the system chassis. These USB connectors comply with USB 2.0 specification that supports up to 480 Mbps connection speed. USB connectors (10-1 pin USB78, USB910) USB78 USB+5V USB_P8USB_P8+ GND NC P8H61-M LE/USB3 PIN 1 PIN 1 USB+5V USB_P7USB_P7+ GND P8H61-M LE/USB3 USB2.0 connectors Never connect a 1394 cable to the USB connectors. Doing so will damage the motherboard! The USB module cable is purchased separately. Chapter 1: Product introduction USB+5V USB_P9USB_P9+ GND USB+5V USB_P10USB_P10+ GND NC GND RSATA_TXP1 RSATA_TXN1 GND RSATA_RXP1 RSATA_RXN1 GND USB910 1-25