Asus P8H61-M2 TPM SI User Manual - Page 14

1.2 1.2.1 Motherboard overview Motherboard layout Ensure that you install the motherboard into the chassis in the correct orientation. The edge with external ports goes to the rear part of the chassis. KB_USB56 12 EPU 3 2 22.9cm(9.0in) CPU_FAN 4 5 TPM COM1 Super I/O DVI DDR3 DIMM_A1 (64bit, 240-pin module) DDR3 DIMM_A2 (64bit, 240-pin module) DDR3 DIMM_B1 (64bit, 240-pin module) DDR3 DIMM_B2 (64bit, 240-pin module) EATXPWR ATX12V ASM 1442 Place this side towards the rear of the chassis. USB34 VGA LGA1155 6 LPT 24.4cm(9.6in) LAN1_USB12 CHA_FAN Lithium Cell CMOS Power 1 AUDIO PCIEX16_1 RTL 8111E ASM 1083 P8H61-M2/TPM/SI PCI1 PCI2 Intel® H61 CHASSIS 32Mb BIOS 7 VIA 1708S SPDIF_OUT PCIEX1_1 AAFP USB910 SB_PWR USB78 F_PANEL CLRTC SPEAKER SATA3G_3 SATA3G_1 SATA3G_4 SATA3G_2 15 14 13 12 11 10 9 8 Place eight screws into the holes indicated by circles to secure the motherboard to the chassis. DO NOT overtighten the screws! Doing so can damage the motherboard. The TPM chip is available in P8H61-M2/TPM/SI only. 1.2.2 Layout contents Connectors/Jumpers/Slots/LED 1. ATX power connectors (24-pin EATXPWR, 4-pin ATX12V) 2. CPU and Chassis fan connectors (4-pin CPU_FAN, 3-pin CHA_FAN) 3. LGA775 CPU socket 4. DDR3 DIMM slots 5. Serial port connector (10-1 pin COM1) 6. LPT connector (26-1 pin LPT) 7. Chassis intrusion connector (4-1 pin CHASSIS) 8. Serial ATA connectors (7-pin SATA3G1-4) Page Connectors/Jumpers/Slots/LED 1-10 9. System panel connector (10-1 pin F_PANEL) 1-11 10 Speaker connector (4- pin SPEAKER) 1-3 11. Clear RTC RAM (3-pin CLRTC) 1-3 12. Standby power LED (SB_PWR) 1-11 13. USB connectors (10-1 pin USB78, USB910) 1-12 14. Front panel audio connector (10-1 pin AAFP) 1-15 15 Digital audio connector (4-1 pin SPDIF_OUT) 1-13 Page 1-12 1-14 1-8 1-1 1-14 1-13 1-15 1-2 ASUS P8H61-M2 Series