Asus PC-DL Deluxe User Guide - Page 122
Creating a RAID Volume
View all Asus PC-DL Deluxe manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 122 highlights
5.5.4 Creating a RAID Volume To create a RAID 0 volume: 1. Select the option 1. Create RAID Volume from the Main menu, then press . The Create Array menu appears. Intel(R) Integrated RAID for Serial ATA - RAID Configuration Utility Copyright(C) 2003 Intel Corporation. All Rights Reserved. v3.x.x.xxxx [ CREATE ARRAY MENU ] Name: RAID_Volume1 Stripe Size: 64KB RAID Level: RAID0(Striping) Capacity: 37.2GB Create Volume [ HELP ] Enter a string between 1 and 16 characters in length that can be used to uniquely identify the RAID volume. This name is case sensitive and can not contain special characters. [ ]-Change [TAB]-Next [ESC] Previous Menu [Enter]-Select 2. Type a name for your RAID volume using 1 to 16 characters (letters and/or numbers, no special characters). Press . 3. Use the Up and Down arrow keys to select the stripe size for the RAID 0 array. Press to make the selection. The available values range from 8 KB to 128 KB. The default is 64 KB. Select a stripe value from the following suggestions depending on your planned drive usage. • 16 KB - low disk usage • 64 KB - typical disk usage • 128 KB - performance disk usage 4. Highlight Create Volume then press to create the array. Press Y when a confirmation message appears. Are you sure you want to create this volume (Y/N) 5. Scroll down to option 4. Exit and press to exit the RAID configuration utility. Press Y when a confirmation message appears. 5-20 Chapter 5: Driver installation