Asus PR-DLSW PR-DLSW M/B manual pdf format file - Page 35
Memory Configurations
View all Asus PR-DLSW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
2.5.2 Memory Configurations The motherboard supports system memory of up to 12GB in a two-way interleaved configuration. As a rule, this configuration requires that you install identical DDR DIMMs (exactly the same type and size) in pairs. For example, if you installed a 512MB module into DDRA1, you must install the same type of 512MB module into DDRB1. The same rule applies to pairs DDRA2/DDRB2 and DDRA3/DDRB3. The only exception to the above rule allows you to install one DIMM into DDRA1 socket (the socket closest to the ATX power connector). Installing a single DIMM into any other socket would not work. The following table lists the DIMM socket pairs and the memory modules that you can install. Memory configuration table DIMM Socket DDRA1 DDRB1 DDRA2 DDRB2 DDRA3 DDRB3 184-pin ECC DDR DIMM Total Memory SDRAM 128MB, 256MB, 512MB, 1GB, 2GB x1 SDRAM 128MB, 256MB, 512MB, 1GB, 2GB x1 SDRAM 128MB, 256MB, 512MB, 1GB, 2GB x1 SDRAM 128MB, 256MB, 512MB, 1GB, 2GB x1 SDRAM 128MB, 256MB, 512MB, 1GB, 2GB x1 SDRAM 128MB, 256MB, 512MB, 1GB, 2GB x1 Total System Memory (Max. 12GB) The system chipset only supports PC2100/1600 registered ECC DIMMs. Make sure to use only the specified DIMM types for stable system operation. ASUS PR-DLSW motherboard user guide 2-9