Asus PR-DLSW PR-DLSW M/B manual pdf format file - Page 46
Hardware information, ATX power connectors 24/20-pin EATXPWR, 8-pin CON12V
View all Asus PR-DLSW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 46 highlights
6. ATX power connectors (24/20-pin EATXPWR, 8-pin CON12V) These connectors connect to an ATX 12V power supply. The plugs from the power supply are designed to fit these connectors in only one orientation. Find the proper orientation and push down firmly until the connectors completely fit. In addition to the 24/20-pin EATXPWR connector, this motherboard requires that you connect the 8-pin +12V power plug to the CON12V connector to provide sufficient power to the CPU. Make sure that your ATX 12V power supply can provide 20A on the +12V lead and at least 1A on the +5-volt standby lead (+5VSB). The minimum recommended wattage is 300W for a fully configured system. The system may become unstable and may experience difficulty powering up if the power supply is inadequate. 20-pin +3 Volts +12 Volts +12 Volts +5V Standby Power OK Ground +5 Volts Ground +5 Volts Ground +3 Volts +3 Volts 24-pin Power Connector 1 EATXPWR Ground +5 Volts +5 Volts +5 Volts -5 Volts Ground Ground Ground PSON# Ground -12 Volts +3 Volts ® PR-DLSW 4-pin For Power Supply with 20-pin+4-pin Power Connector 12V 12V 12V 12V CON12V 8-pin PR-DLSW ATX Power Connector GND GND GND GND 2-20 Chapter 2: Hardware information