Asus PRIME H610M-D Intel 600 series Channel BIOS UM English - Page 37

SA CEP Enable Allows you to enable or disable SA CEP (Current Excursion Protection) Support. Uses pCode Mailbox Command 0x37, Sub-command 0x1. Set Databit3 to 1. Configuration options: [Auto] [Disabled] [Enabled] IA SoC Iccmax Reactive Protector Configuration options: [Auto] [Disabled] [Enabled] Inverse Temperature Dependency Throttle Configuration options: [Auto] [Disabled] [Enabled] IA VR Voltage Limit Voltage Limit (VMAX). This value represents the Maximum instantaneous voltage allowed at any given time. Range is 0 - 7999mV. Uses BIOS VR mailbox command 0x8. Configuration options: [Auto] [0] - [7999] Thermal Velocity Boost TVB Voltage Optimizations This service controls thermal based voltage optimizations for processors that implement the Intel Thermal Velocity Boost (TVB) feature. This item is set to [Enabled] by default. Uses Overclocking Mailbox command 0x18/0x19. Configuration options: [Auto] [Disabled] [Enabled] V-Max Stress If set to [Enabled], Frequency may be clipped if the max voltage on the silicon is too high. Frequency will not be clipped if disabled. Configuration options: [Auto] [Disabled] [Enabled] Overclocking TVB Enable this to be able to draw temperature/frequency dependencies. Configuration options: [Auto] [Disabled] [Enabled] [+1Boost Profile] [+2Boost Profile] +1Boost Profile(K CPU): This setting will enable additional boost of one bin with the help of Auto Optimized Temperature Control. +2Boost Profile(K CPU): This setting will enable additional boost of two bins with the help of Auto Optimized Temperature Control. The following items appear only when Overclocking TVB is set to [Enabled]. 1-Core Active / 2-Core Active / 3-Core Active / 4-Core Active / 5-Core Active / 6-Core Active Configuration options: [Auto] [Enabled] PRIME / ProArt / TUF GAMING Intel 600 Series BIOS Manual 37