Asus S1-AT5NM10E User Manual - Page 42

ASUS EZ Flash 2

Get Asus S1-AT5NM10E PDF manuals and user guides View all Asus S1-AT5NM10E manuals
Add to My Manuals
Save this manual to your list of manuals

Page 42 highlights

4.1.2 ASUS EZ Flash 2 The ASUS EZ Flash 2 feature allows you to update the BIOS without using an OS‑based utility. Before you start using this utility, download the latest BIOS file from the ASUS website at www.asus.com. To update the BIOS using EZ Flash 2: 1. Insert the USB flash disk that contains the latest BIOS file to the USB port, then launch EZ Flash 2 in any of these two ways: • Press + during POST. • Enter the BIOS setup. Go to the Tools menu, select EZ Flash 2, and press to enable it. 2. Press to switch between drives until the correct BIOS file is found, then press . EZ Flash 2 performs the BIOS updating process and automatically reboots the system when done. ASAUSSUTSeTkekEEZZ FFllaassh 2 BBIIOOSS RROOMMUtUitliiltiytyV3.V336.44 FLASH TYPE: MXIC 25L8005 Current ROM BOARD: S1-AT5NM10E VER: 0103 (H:00 B:02) DATE: 04/06/2010 Update ROM BOARD: Unknown VER: Unknown DATE: Unknown PATH: A:\ A: Note [Enter] Select or Load [Up/Down/Home/End] Move [Tab] Switch [B] Backup [V] Drive Info [ESC] Exit • This function supports USB flash disks with FAT 32/16 format and single partition only. • DO NOT shut down or reset the system while updating the BIOS to prevent system boot failure! 4-4 Chapter 4: BIOS setup

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
4-4
Chapter 4: BIOS setup
4.1.2
ASUS EZ Flash 2
The ASUS EZ Flash 2 feature allows you to update the BIOS without using an
OS-based utility.
Before you start using this utility, download the latest BIOS file from the ASUS
website at www.asus.com.
To update the BIOS using EZ Flash 2:
1.
Insert the USB flash disk that contains the latest BIOS file to the USB port,
then launch EZ Flash 2 in any of these two ways:
•
Press
<Alt> + <F2>
during POST.
•
Enter the BIOS setup. Go to the
Tools
menu, select
EZ Flash 2
, and
press
<Enter>
to enable it.
2.
Press
<Tab>
to switch between drives until the correct BIOS file is found,
then press <Enter>. EZ Flash 2 performs the BIOS updating process and
automatically reboots the system when done.
•
This function supports USB flash disks with FAT 32/16 format and single
partition only.
•
DO NOT shut down or reset the system while updating the BIOS to prevent
system boot failure!
ASUSTek EZ Flash 2 BIOS ROM Utility V3.44
Current ROM
Update ROM
A:
Note
FLASH TYPE:
MXIC 25L8005
PATH:
A:\
BOARD:
S1-AT5NM10E
VER:
0103 (H:00
B:02)
DATE:
04/06/2010
BOARD:
Unknown
VER:
Unknown
DATE:
Unknown
[Enter] Select or Load
[Tab] Switch
[V] Drive Info
[Up/Down/Home/End] Move
[B] Backup
[ESC] Exit