Asus SP98AGP-X SP98AGP-X User Manual

Asus SP98AGP-X Manual

Get Asus SP98AGP-X PDF manuals and user guides View all Asus SP98AGP-X manuals
Add to My Manuals
Save this manual to your list of manuals

Asus SP98AGP-X manual content summary:

  • Asus SP98AGP-X | SP98AGP-X User Manual - Page 1
    R SP98AGP-X Pentium® ATX Motherboard USER'S MANUAL
  • Asus SP98AGP-X | SP98AGP-X User Manual - Page 2
    OR LIABILITY FOR ANY ERRORS OR INACCURACIES THAT MAY APPEAR IN THIS MANUAL, INCLUDING THE PRODUCTS AND SOFTWARE DESCRIBED IN IT. Copyright © 1998 ASUSTeK COMPUTER INC. All Rights Reserved. Product Name: ASUS SP98AGP-X Manual Revision: 1.03 Release Date: March 1998 2 ASUS SP98AGP-X User's Manual
  • Asus SP98AGP-X | SP98AGP-X User Manual - Page 3
    . 25, 40880 Ratingen, BRD, Germany Telephone: 49-2102-445011 Fax: 49-2102-442066 Email: [email protected] Technical Support Hotline: 49-2102-499712 BBS: 49-2102-448690 Email: [email protected] WWW: www.asuscom.de FTP: ftp.asuscom.de/pub/ASUSCOM ASUS SP98AGP-X User's Manual 3
  • Asus SP98AGP-X | SP98AGP-X User Manual - Page 4
    Procedures 33 IV. BIOS SOFTWARE 34 Support Software 34 Flash Memory BIOS Features Setup 41 Details of BIOS Features Setup 41 Chipset Features Setup 44 Details of Chipset Features Setup 44 Power Management Setup 47 Details of Power Management Setup 47 4 ASUS SP98AGP-X User's Manual
  • Asus SP98AGP-X | SP98AGP-X User Manual - Page 5
    Settings for the ASUS PCI-SC860 61 Terminator Settings for the ASUS PCI-SC200 61 SCSI ID Numbers for SCSI Devices 62 SCSI ID Priority 62 VII. ASUS LAN Card 63 ASUS PCI-L101 Fast Ethernet Card 63 Features 64 Software Driver Support 64 Question and Answer 64 ASUS SP98AGP-X User's Manual 5
  • Asus SP98AGP-X | SP98AGP-X User Manual - Page 6
    radio frequency energy and, if not installed and used in accordance with manufacturer's instructions, may cause harmful interference to radio communications. However, there is no guarantee Radio Interference Regulations of the Canadian Department of Communications. 6 ASUS SP98AGP-X User's Manual
  • Asus SP98AGP-X | SP98AGP-X User Manual - Page 7
    and use of the files • Technical Support Form This user's manual Onboard audio chipset and audio driver (optional) Infrared module (optional) ASUS PCI-SC200 Fast-SCSI or PCI-SC860 Ultra-Fast SCSI card (optional) ASUS PCI-L101 10/100 Fast Ethernet PCI Card (optional) ASUS SP98AGP-X User's Manual 7
  • Asus SP98AGP-X | SP98AGP-X User Manual - Page 8
    device. • Symbios SCSI BIOS: Onboard firmware to support optional ASUS SCSI controller cards. • Optional Integrated Audio: Optional onboard audio with 3D sound. • Compliancy: ACPI ready for advanced power management features and PC97 compliant for greater support. 8 ASUS SP98AGP-X User's Manual
  • Asus SP98AGP-X | SP98AGP-X User Manual - Page 9
    ASUS Smart series of motherboards. ACPI provide more Energy Saving Features for the future operating systems (OS) supporting 95 must be used. • PC97 Compliant - Both the BIOS and hardware levels of ASUS Smart series of motherboards meet PC97 compliancy. The new PC ASUS SP98AGP-X User's Manual 9
  • Asus SP98AGP-X | SP98AGP-X User Manual - Page 10
    . Through the way a particular LED illuminates, the user can determine the stage the computer is in. A simple glimpse provides useful information to the user. 10 ASUS SP98AGP-X User's Manual
  • Asus SP98AGP-X | SP98AGP-X User Manual - Page 11
    II. FEATURES Motherboard Parts II. FEATURES The ASUS SP98AGP-X Motherboard T: PS/2 Mouse B: PS/2 Keyboard T: USB Port 1 B: USB Port 2 COM 1 T: Parallel Conn. B: Optional) Audio Chipset AGP Port 3 PCI Slots Programmable Flash ROM 3 ISA Slots SiS 5591 Chipset ASUS SP98AGP-X User's Manual 11
  • Asus SP98AGP-X | SP98AGP-X User Manual - Page 12
    Layout Out Line Line Game/Midi Port Multi-I/O Chip BIOS EEPROM ISA Slot 1 CR2032 3 Volt Lithium Cell CHA_FAN Infrared Con. (IrDA) ISA Slot 2 ISA Slot 3 IDE LED Panel Connections NOTE: Outlined items (thick dashes) are optional and may not be present. 12 ASUS SP98AGP-X User's Manual
  • Asus SP98AGP-X | SP98AGP-X User Manual - Page 13
    pin Block) 6) AUDIO (optional) p. 27 Audio Port -Line Out, Line In, Mic (Three 1/8" Female) 7) GAME (optional) p. 27 Joystick/Midi Connector (15-pin Female) 8) USB p. 27 Universal Serial BUS Ports 1 & 2 must not use this address, otherwise conflicts will occur. ASUS SP98AGP-X User's Manual 13
  • Asus SP98AGP-X | SP98AGP-X User Manual - Page 14
    Install Expansion Cards 5. Connect Ribbon Cables, Cabinet Wires, and Power Supply 6. Setup the BIOS Software 1. Jumpers Several hardware settings are made through the use of jumper caps to connect component whenever the components are separated from the system. 14 ASUS SP98AGP-X User's Manual
  • Asus SP98AGP-X | SP98AGP-X User Manual - Page 15
    to "Normal," (4) Turn on your computer, (5) Hold down during bootup and enter BIOS setup to re-enter user preferences. Battery Test Jumper (RTCLR) You can test the battery's Clear CMOS) Normal (Default) Clear CMOS BATTERY TEST III. INSTALLATION Jumpers ASUS SP98AGP-X User's Manual 15
  • Asus SP98AGP-X | SP98AGP-X User Manual - Page 16
    power current for your keyboard. Make sure that your power supply can support at least 300mAmp +5VSB before selecting +5VSB. Multi-I/O +5V + Ratio 1 2 3 2.5x(5/2) 2.5x(5/2) 1.0x(1/1) 2.0x(2/1) 2.5x(5/2) 1 2 3 ------------4.0x(4/1) 1 2 3 ------------4.5x(9/2) 16 ASUS SP98AGP-X User's Manual
  • Asus SP98AGP-X | SP98AGP-X User Manual - Page 17
    [1-2] [2-3] [1-2] [2-3] [2-3] [1-2] III. INSTALLATION Jumpers *NOTE: The only IBM or Cyrix 6x86(L or M1) that is supported on this motherboard is Rev 2.7 or later. Look on the underside of the CPU for the serial number. The number should read G8DC6620A or later. ASUS SP98AGP-X User's Manual 17
  • Asus SP98AGP-X | SP98AGP-X User Manual - Page 18
    VID2 VID1 VID0 2.9 Volts VID3 VID2 VID1 VID0 3.4 Volts VID3 VID2 VID1 VID0 2.2 Volts VID3 VID2 VID1 VID0 3.2 Volts VID3 VID2 VID1 VID0 3.5 Volts 18 ASUS SP98AGP-X User's Manual
  • Asus SP98AGP-X | SP98AGP-X User Manual - Page 19
    with higher pin density than EDO chips. • BIOS shows EDO or SDRAM memory on bootup screen. • 8 chip/side modules do not support parity, only 9 chip/side modules support parity. • Single sided modules are usually 16 or 64 MB, double sided are usually 8, 32, or 128MB. ASUS SP98AGP-X User's Manual 19
  • Asus SP98AGP-X | SP98AGP-X User Manual - Page 20
    type to be inserted into the DIMM slot on the motherboard. You must ask your retailer for the specifications before purchasing. Four clock signals are supported on this motherboard. 20 ASUS SP98AGP-X User's Manual
  • Asus SP98AGP-X | SP98AGP-X User Manual - Page 21
    III. INSTALLATION (This page was intentionally left blank) ASUS SP98AGP-X User's Manual 21
  • Asus SP98AGP-X | SP98AGP-X User Manual - Page 22
    . Insert the CPU with the correct orientation as shown. Use the notched corner of the CPU as your guide. The white dot should point towards the end the of the lever. Notice that there is a blank . Blank 1 Lever Lock Notch 1 ZIF Socket 7 with Pentium MMX Processor 22 ASUS SP98AGP-X User's Manual
  • Asus SP98AGP-X | SP98AGP-X User Manual - Page 23
    with the screw you removed in step 4. 7. Replace the computer system's cover. 8. Edit the BIOS settings if necessary. (such as "IRQ xx Used By ISA: Yes" in PNP AND PCI or your computer will experience problems when those two devices are in use at the same time. ASUS SP98AGP-X User's Manual 23
  • Asus SP98AGP-X | SP98AGP-X User Manual - Page 24
    . In the PCI bus design, the BIOS automatically assigns an IRQ to a PCI support a new generation of graphics cards with ultra-high memory bandwidth, such as the ASUS AGP-V264GT3 and ASUS AGP-V3000. Accelerated Graphics Port (AGP) ASUS AGP-V264GT3 ASUS AGP-V3000 24 ASUS SP98AGP-X User's Manual
  • Asus SP98AGP-X | SP98AGP-X User Manual - Page 25
    system will direct IRQ12 to the PS/2 mouse if one is detected. If not detected, expansion cards can use IRQ12. See "PS/2 Mouse Control" in BIOS Features Setup of the BIOS SOFTWARE. PS/2 Mouse (6-pin Female) ASUS SP98AGP-X User's Manual 25
  • Asus SP98AGP-X | SP98AGP-X User Manual - Page 26
    in Chipset Features Setup of the BIOS SOFTWARE. COM 1 COM 2 Serial Ports (9-pin Male) 5. Floppy Disk Drive Connector (34-1pin FLOPPY) This connector supports the provided floppy drive ribbon cable. Pin 1 Floppy Disk Drive Connector Floppy Drive Connector Pin 1 26 ASUS SP98AGP-X User's Manual
  • Asus SP98AGP-X | SP98AGP-X User Manual - Page 27
    connector for playing games. Connect Midi devices for playing or editing audio. Joystick/Midi (15-pin Female) 8. Universal Serial BUS Ports 1 & 2 (Two 4-pin Female Sockets) Two USB ports are available for connecting USB devices. USB 1 Universal Serial Bus (USB) 2 ASUS SP98AGP-X User's Manual 27
  • Asus SP98AGP-X | SP98AGP-X User Manual - Page 28
    disk for the jumper settings. BIOS now supports SCSI device or IDE CD-ROM bootup (see "HDD Sequence SCSI/IDE First" & "Boot Sequence" in the BIOS Features Setup of the BIOS SOFTWARE) (Pin 20 is removed , try reversing the 2-pin plug. IDE Activity LED R + IDELED 28 ASUS SP98AGP-X User's Manual
  • Asus SP98AGP-X | SP98AGP-X User Manual - Page 29
    Connectors III. INSTALLATION 11. Chassis,CPU,&PowerSupplyFanConnectors(3-pinCHA_,CPU_,PWR_FAN) These connectors support cooling fans of 500mAMP (6 Watts) or less. Orientate the fans so a compatible modem. Modem-In Ground Ground Modem-Out R Onboard Modem Connector ASUS SP98AGP-X User's Manual 29
  • Asus SP98AGP-X | SP98AGP-X User Manual - Page 30
    experience difficulty in powering on your system if your power supply cannot support the load. For Wake on LAN support, your ATX power supply must supply at least 720mAmp. ATX Power Volts -5.0 Volts Ground Ground Ground Power Supply Ground -12.0 Volts +3.3 Volts 30 ASUS SP98AGP-X User's Manual
  • Asus SP98AGP-X | SP98AGP-X User Manual - Page 31
    power up when there is a wakeup package (signal) received from the network through the ASUS PCIL101 LAN card. Requires the ASUS PCI-L101 and an ATX power supply with at least 720mAmp +5VSB. PME Ground +5 Audio Channel Ground Right Audio Channel CD In Connector R R ASUS SP98AGP-X User's Manual 31
  • Asus SP98AGP-X | SP98AGP-X User Manual - Page 32
    support. 19. SMI Suspend Switch Lead (SMI, 2 pins) This allows the user to manually shorted will not cause any problems. May require one or two pushes depending Suspend Switch" in the Power Management Setup of the BIOS SOFTWARE section should be on the default setting of ASUS SP98AGP-X User's Manual
  • Asus SP98AGP-X | SP98AGP-X User Manual - Page 33
    for assistance. 7. During power-on, hold down to enter BIOS setup. Follow the instructions in the next section, BIOS SOFTWARE. * Powering Off your computer: You must first exit or shut computer" will not appear when shutting down with ATX power supplies. ASUS SP98AGP-X User's Manual 33
  • Asus SP98AGP-X | SP98AGP-X User Manual - Page 34
    BIOS in case you need to reinstall it. Create a bootable DOS diskette without AUTOEXEC.BAT and CONFIG.SYS and save both PFLASH.EXE and the BIOS file(s) to it. Note: BIOS FEATURES SETUP Boot Sequence needs to be set to A first in order to boot from your disk drive A. 34 ASUS SP98AGP-X User's Manual
  • Asus SP98AGP-X | SP98AGP-X User Manual - Page 35
    Plug-and-Play (PnP) configuration record. 2. Update BIOS Including Boot Block and ESCD This option updates the boot block, the baseboard BIOS, and the PnP extended system configuration data- (ESCD) parameter block from a new BIOS file. IV. BIOS Flash Memory Writer ASUS SP98AGP-X User's Manual 35
  • Asus SP98AGP-X | SP98AGP-X User Manual - Page 36
    memory chip is not programmable or is not supported with the PnP BIOS and therefore cannot be programmed by the Flash Memory Writer utility. 1. Download an updated ASUS BIOS file from the Internet (WWW or FTP) or a BBS (Bulletin Board Service) (see ASUS CONTACT INFORMATION on page 3 for details) and
  • Asus SP98AGP-X | SP98AGP-X User Manual - Page 37
    BIOS SOFTWARE 6. BIOS Setup The motherboard supports two programmable Flash ROM chips: 5 Volt and 12 Volt. Either of these memory chips can be updated when BIOS upgrades are released. Use the Flash Memory Writer utility to download the new BIOS file . BIOS BIOS Setup ASUS SP98AGP-X User's Manual 37
  • Asus SP98AGP-X | SP98AGP-X User Manual - Page 38
    Load Defaults The Load BIOS Defaults option loads the minimum settings for troubleshooting. Load Setup Defaults, on the other hand, is for loading optimized defaults for regular use. Choosing , day and year are: Month: (1 to 12), Day: (1 to 31), Year: (up to 2079) 38 ASUS SP98AGP-X User's Manual
  • Asus SP98AGP-X | SP98AGP-X User Manual - Page 39
    an AUTOEXEC.BAT file. For information on how to create this file, refer to the MS-DOS manual. Hard Disk Drives support LBA. Large type of drive can only be used with MS-DOS and is very uncommon. Most IDE drives over 528MB support the LBA mode. IV. BIOS Standard CMOS ASUS SP98AGP-X User's Manual
  • Asus SP98AGP-X | SP98AGP-X User Manual - Page 40
    on without having to reconfigure your hard disk type. If you use older hard disks that do not support this feature, then you must configure the hard disk in the standard method as described earlier by ; All,But Diskette; and All,But Disk/Key. IV. BIOS Standard CMOS 40 ASUS SP98AGP-X User's Manual
  • Asus SP98AGP-X | SP98AGP-X User Manual - Page 41
    . Some entries are required by the motherboard's design to remain in their default settings. IV. BIOS BIOS Features A section at the lower right of the screen displays the control keys you can use. is Enabled. A complete test of the system is done on each test. ASUS SP98AGP-X User's Manual 41
  • Asus SP98AGP-X | SP98AGP-X User Manual - Page 42
    When enabled, the BIOS will seek drive A one time. Floppy Disk Access Control (R/W) This allows protection of files from the computer system properly. The setting Enabled should correct this problem. Otherwise leave this on the setup default BIOS BIOS Features 42 ASUS SP98AGP-X User's Manual
  • Asus SP98AGP-X | SP98AGP-X User Manual - Page 43
    Shadow (Enabled) This field allows you to change the video BIOS location from ROM to RAM. Relocating to RAM enhances system performance, as information access is characters. Four delay rate options are available: 250, 500, 750, and 1000. IV. BIOS BIOS Features ASUS SP98AGP-X User's Manual 43
  • Asus SP98AGP-X | SP98AGP-X User Manual - Page 44
    this screen are the same as in the BIOS Features Setup screen. IV. BIOS Chipset Features NOTE: SETUP Defaults are noted in or check with your vendor for DIMM specifications. Linear Mode SRAM Support (Disabled) For a slightly better performance on IBM/Cyrix CPUs, 44 ASUS SP98AGP-X User's Manual
  • Asus SP98AGP-X | SP98AGP-X User Manual - Page 45
    set this to Disabled. DRAM are 64 (Not 72) bits wide This motherboard does not have parity support, thus DRAM modules are always 64 bits wide. Data Integrity Mode (None) The setting None has 3F8H/IRQ4, while for Serial Port 2 is 2F8H/IRQ3. IV. BIOS Chipset Features ASUS SP98AGP-X User's Manual 45
  • Asus SP98AGP-X | SP98AGP-X User Manual - Page 46
    , which leaves the second serial port UART to support the COM2 serial port connector. Onboard PCI IDE Enable BIOS will automatically adjust or disable this setting for slower IDE devices so that Auto or high settings will not cause problems BIOS Chipset Features 46 ASUS SP98AGP-X User's Manual
  • Asus SP98AGP-X | SP98AGP-X User Manual - Page 47
    shuts down the hard disk after a period of inactivity. Power Management Chipset Features IV. BIOS IV. BIOS NOTE: SETUP Defaults are noted in parenthesis next to each function heading. Details of -> Off (default); All Modes -> Off; Always On; and Suspend -> Off. ASUS SP98AGP-X User's Manual 47
  • Asus SP98AGP-X | SP98AGP-X User Manual - Page 48
    Power Management System) features allow the BIOS to control the video display card if it supports the DPMS feature. Blank Screen only BIOS setup screen. Set to Ignore if one of these are not used so that error messages will not be given. IV. BIOS Power Management 48 ASUS SP98AGP-X User's Manual
  • Asus SP98AGP-X | SP98AGP-X User Manual - Page 49
    Follow the onscreen instructions to troubleshoot. PNP and of using the BIOS. Thus interrupts may manual settings of NA, 5, 7, 9, 10, 11, 12, 14 or 15 for each slot. PCI Latency Timer (32 PCI Clock) The default setting of 32 PCI Clock enables maximum PCI performance. ASUS SP98AGP-X User's Manual
  • Asus SP98AGP-X | SP98AGP-X User Manual - Page 50
    , the resource settings or IRQs for these devices are, by default, automatically assigned by the BIOS. You may manually select the settings: 5, 7, 9, 10, 11, 12, 14, and 15. If you are not using any USB devices, you may set this field to NA. IV. BIOS PnP / PCI 50 ASUS SP98AGP-X User's Manual
  • Asus SP98AGP-X | SP98AGP-X User Manual - Page 51
    troubleshooting default values permanently stored in the BIOS ROM. These default settings are non-optimal and disable all high performance features. To load these default settings, highlight "Load BIOS CMOS Setup screen. Power Management IV. BIOS Load Defaults ASUS SP98AGP-X User's Manual 51
  • Asus SP98AGP-X | SP98AGP-X User Manual - Page 52
    the screen automatically reverts to the main screen. IV. BIOS Password To implement password protection, specify in the "Security Option" field of the BIOS Features Setup screen when the system will prompt for the in section III for procedures on clearing the CMOS. 52 ASUS SP98AGP-X User's Manual
  • Asus SP98AGP-X | SP98AGP-X User Manual - Page 53
    enters them into the Standard CMOS Setup screen. IV. BIOS HDD Autodetection Up to four IDE drives can be screen. If you are auto-detecting a hard disk that supports the LBA mode, three lines will appear in the parameter problem if the drive is new and empty. ASUS SP98AGP-X User's Manual 53
  • Asus SP98AGP-X | SP98AGP-X User Manual - Page 54
    BIOS Save & Edit Exit Without Saving Select this option to exit the Setup utility without saving the modifications you specify during the current session. To exit without saving, highlight the "Exit Without Saving" option on the main screen and then press . 54 ASUS SP98AGP-X User's Manual
  • Asus SP98AGP-X | SP98AGP-X User Manual - Page 55
    CD: Allows you to see the contents of the ASUS support CD. • Technical Support Form: View the Technical Support Form with Notepad. • Read Me: View additional notes with Notepad. • Exit: Exit the selection menu. IV. BIOS Load Setup Defaults V. SOFTWARE Support CD ASUS SP98AGP-X User's Manual 55
  • Asus SP98AGP-X | SP98AGP-X User Manual - Page 56
    DMI) Introducing the ASUS DMI Configuration Utility This motherboard supports DMI within the BIOS level and provides files, "REM" HIMEM.SYS in the CONFIG.SYS, or press during bootup to bypass your AUTOEXEC.BAT and CONFIG.SYS files. V. SOFTWARE DMI Introduction 56 ASUS SP98AGP-X User's Manual
  • Asus SP98AGP-X | SP98AGP-X User Manual - Page 57
    SUPPORT SOFTWARE Using the ASUS BIOS Auto Detect ***, appears on the right for each menu item on the left side that has been auto detected by the system BIOS. A heading, *** User Modified ***, will appear on the right for menu items that have been modified by the user. ASUS SP98AGP-X User's Manual
  • Asus SP98AGP-X | SP98AGP-X User Manual - Page 58
    path and file name here. Load BIOS Defaults V. SOFTWARE Using DMI Utility You can load the BIOS defaults from a MIFD file and can clear all user modified and added data. You must reboot your computer in order for the defaults to be saved back into the Flash BIOS. 58 ASUS SP98AGP-X User's Manual
  • Asus SP98AGP-X | SP98AGP-X User Manual - Page 59
    that are auto detected by BIOS and current operating systems that support Plug and Play features. For information about these drivers and their usage, view the Readme files included in the driver packages. ASUS PCI-SC200 & PCI-SC860 SCSI Cards The ASUS PCI-SC200 or the ASUS PCI-SC860 may be bundled
  • Asus SP98AGP-X | SP98AGP-X User Manual - Page 60
    jumper JP1 or JP2. The default setting for the card already is INT A, so you do not need to change the setting to use the ASUS PCI-SC200 with this motherboard. JP JP 12 1 2 3 JP JP 12 1 2 3 INT A (Def) INT B JP JP 12 devices between the ends must be Disabled. 60 ASUS SP98AGP-X User's Manual
  • Asus SP98AGP-X | SP98AGP-X User Manual - Page 61
    only internal or only external devices connected to the ASUS PCI-SC200, then you must terminate the ASUS PCI-SC200. If you have both internal and external devices connected, you must not terminate the card. See the following example which illustrates this concept. ASUS SP98AGP-X User's Manual 61
  • Asus SP98AGP-X | SP98AGP-X User Manual - Page 62
    switch. Refer to the manual for any device you install for details on how to set its ID number. SCSI ID Priority The ASUS PCI-SC200 and ASUS PCI-SC860 are 8bit single-channel SCSI cards. SCSI ID 7 has the highest priority, and SCSI ID 0 has the lowest priority. 62 ASUS SP98AGP-X User's Manual
  • Asus SP98AGP-X | SP98AGP-X User Manual - Page 63
    of the motherboard. Connect the LAN activity output signal (LAN_LED) to the system cabinet's front panel LAN_LED in order to display the LAN data activity. ASUS SP98AGP-X User's Manual 63
  • Asus SP98AGP-X | SP98AGP-X User Manual - Page 64
    Wake-On-LAN ? A: The Wake-On-LAN feature provides the capability to remotely power on sys- tems supporting Wake-On-LAN by simply sending a wake-up frame. With this feature, remotely uploading/downloading data to/from Rev. 3.10 or up that can trigger wake-up frame. 64 ASUS SP98AGP-X User's Manual
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
R
SP98AGP-X
Pentium
®
ATX Motherboard
USER’S MANUAL