Asus T3-P5G43 User Manual - Page 78
Configure SATA as [IDE]
View all Asus T3-P5G43 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 78 highlights
PIO Mode [Auto] Selects the PIO mode. Configuration options: [Auto] [0] [1] [2] [3] [4] DMA Mode [Auto] Selects the DMA mode. Configuration options: [Auto] SMART Monitoring [Auto] Enables or disables the S.M.A.R.T. (Self Monitoring and Reporting Technology) capability of your hard drive. This features allows your system to report read/write errors of the hard drive and to issue warnings when a third party hardware monitor utility is installed. Configuration options: [Auto] [Disabled] [Enabled] 32Bit Data Transfer [Enabled] Enables or disables 32-bit data transfer. Configuration options: [Disabled] [Enabled] 5.3.4 Configure SATA as [IDE] Sets the configuration for the Serial ATA connectors supported by the Southbridge chip. Configuration options: [IDE] [AHCI] • If you want to use the Serial ATA hard disk as Parallel ATA phisical storage devices, keep thte default setting [IDE]. • If you want the Serial ATA hard disk drives to use the Advanced Host Controller Interface (AHCI), set this item to [AHCI]. The AHCI allows the onboard storage performance on random workloads by allowing the drive to internally optimize the order of commands. 5-16 Chapter 5: BIOS setup