Asus TS300-E3 PA4 TS300-E3 - Page 139
Creating a RAID 10 set
View all Asus TS300-E3 PA4 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 139 highlights
6.2.2 Creating a RAID 10 set You can create a RAID 10 set using four identical hard disk drives. To create a RAID 10 set using the Easy Configuration option: 1. From the utility main menu, highlight Configure, then press . 2. Use the arrow keys to select Easy Configuration, then press . 3. The ARRAY SELECTION MENU displays the available drives connected to the SATA ports. Select the drive(s) you want to include in the RAID set, then press . When selected, the drive indicator changes from READY to ONLIN A[X]-[Y], where X is the array number, and Y is the drive number. The information of the selected hard disk drive displays at the bottom of the screen. ASUS TS300-E3/PA4 & PS4 6-11
ASUS TS300-E3/PA4 & PS4
6-11
6.2.2
Creating a RAID 10 set
You can create a RAID 10 set using four identical hard disk drives.
To create a RAID 10 set using the
Easy Configuration
option:
1.
From the utility main menu, highlight
Configure
, then press <Enter>.
2.
Use the arrow keys to select
Easy Configuration
, then press <Enter>.
3.
The
ARRAY SELECTION MENU
displays the available drives connected
to the SATA ports. Select the drive(s) you want to include in the RAID set,
then press <SpaceBar>. When selected, the drive indicator changes from
READY to ONLIN A[X]-[Y]
, where X is the array number, and Y is the drive
number.
The information of the selected hard disk drive displays at the bottom of the
screen.