Asus TS300-E3 PA4 TS300-E3 - Page 76
Gigabit LAN controller setting 3-pin LAN_EN1, LAN_EN2, RAID controller selection 3-pin RAID_SEL1
View all Asus TS300-E3 PA4 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 76 highlights
6. Gigabit LAN controller setting (3-pin LAN_EN1, LAN_EN2) These jumpers allow you to enable or disable the onboard Broadcom® BCM5721 Gigabit LAN1 or LAN2 controller. Set to pins 1-2 to activate the Gigabit LAN controller. ® LAN2 LAN_EN1 2 1 Enable P5MT Series LAN_EN1 setting (Default) 3 2 Disable ® LAN2 LAN_EN2 2 1 Enable (Default) 3 2 Disable P5MT Series LAN_EN2 setting 7. RAID controller selection (3-pin RAID_SEL1) [P5MT model only] This jumper allows you to select the RAID configuration utility to use when you create disk arrays. Place the jumper caps over pins 1-2 if you want to use the LSI Logic Embedded SATA RAID Setup Utility (default); otherwise, place the jumper caps to pins 2-3 to use the Intel® Matrix Storage Manager. ® LAN2 RAID_SEL1 1 2 LSI RAID ROM (Default) 2 3 INTEL RAID ROM P5MT Series RAID_SEL1 setting 4-8 Chapter 4: Motherboard information