Asus Terminator P4 533 Terminator P4-533 English user''''s manual - Page 48
Motherboard information, CPU, Chassis, and Power Fan Connectors, pin CPU_FAN1, CHA_FAN1 - cpu support
View all Asus Terminator P4 533 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 48 highlights
5. CPU, Chassis, and Power Fan Connectors (3-pin CPU_FAN1, CHA_FAN1) The three fan connectors support cooling fans of 350mA (4.2 Watts) or a total of 1A (12W) at +12V. Orient the fans so that the heat sink fins allow air flow to go across the onboard heat sinks instead of the expansion slots. The fan wiring and plug may vary depending on the fan manufacturer. Connect the fan cable to the connector matching the black wire to the ground pin. GND +12V Rotation P4SC-E ® CPU_FAN1 CHA_FAN1 Rotation +12V GND P4SC-E 12-Volt Cooling Fan Power IMPORTANT Do not forget to connect the fan cables to the fan connectors. Lack of sufficient air flow within the system may damage the motherboard components. These are not jumpers! DO NOT place jumper caps on the fan connectors! 48 Chapter 3: Motherboard information