Asus Z97-A USB 3.1 User Guide - Page 98
APM Configuration, Restore AC Power Loss [Power Off]
View all Asus Z97-A USB 3.1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 98 highlights
Serial Port Configuration The items in this menu allow you to configure your motherboard's serial ports. Serial Port [Enabled] This item allows you to enable or disable the serial ports. Configuration options: [Disabled] [Enabled] Change Settings [IO=3F8h, IRQ=4] This item allows you to select an optimal setting for Super IO device. Configuration options: [IO=3F8h; IRQ=4] [IO=2F8h; IRQ=3] [IO=3E8h; IRQ=4] [IO=2E8h; IRQ=3] 2.6.8 APM Configuration ErP Ready [Disabled] This item allows you to switch off some power at S4+S5 or S5 to get the system ready for ErP requirement. When set to [Enabled], all other PME options are switched off. Configuration options: [Disabled] [Enabled (S4+S5] [Enabled (S5)] Restore AC Power Loss [Power Off] This item allows your system to go to ON state, OFF state, or both states after an AC power loss. When setting your system to [Last State], it goes to the previous state before the AC power loss. Configuration options: [Power Off] [Power On] [Last State] Power On By PCI-E [Disabled] This item allows you to enable or disable the Wake-on-LAN function of the onboard LAN controller or other installed PCI-E LAN cards. Configuration options: [Disabled] [Enabled] Power On By Ring [Disabled] This item allows you to enable or disable the Wake-on-Modem function. Configuration options: [Disabled] [Enabled] Power On By RTC [Disabled] This item allows you to enable or disable the RTC (Real-Time Clock) to generate a wake event and configure the RTC alarm date. When enabled, you can set the days, hours, minutes, or seconds to schedule an RTC alarm date. Configuration options: [Disabled] [Enabled] 2-44 Chapter 2: BIOS information