Asus Z97-A USB 3.1 User Guide - Page 99
Monitor menu, Network stack [Disable], Create RAID Volume
View all Asus Z97-A USB 3.1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 99 highlights
2.6.9 Network Stack Configuration Network stack [Disable] This item allows you to disable or enable the UEFI network stack. Configuration options: [Disable] [Enable] The following item appears only when you set the Network Stack to [Enabled]. Ipv4/Ipv6 PXE Support [Enabled] This item allows you to enable or disable the Ipv4/Ipv6 PXE wake event. Configuration options: [Disabled] [Enabled] 2.6.10 Intel(R) Rapid Storage Technology Create RAID Volume This item allows you to create a RAID volume. This item only appears when at least one HDD is connected to the Intel® SATA ports and set to RAID mode. Name [Volume1] This item allows you to key in a volume name for your RAID setup. Use only alphanumeric characters for your RAID volume name. It should be 16 characters or less. RAID Level [RAID0(Stripe)] This item allows you to select the RAID level. Configuration options: [RAID0(Stripe] [RAID1(Mirror)] [RAID5(Parity)] [Recovery] Select Disks This item shows the connected SATA devices compatible for setting up RAID. On their dropdown lists, select X to set up the RAID. Strip Size: [32KB] This item allows you to strip the size of your RAID setup. Configuration options: [4KB] [8KB] [16KB] [32KB] [64KB] [128KB] Capacity (MB): [0] This item allows you to set the RAID capacity. ASUS Z97-A/USB 3.1 2-45