Axis Communications Q1765-LE Q1765-LE - User Manual - Page 37

Events, Setting Up an Action Rule

Get Axis Communications Q1765-LE PDF manuals and user guides View all Axis Communications Q1765-LE manuals
Add to My Manuals
Save this manual to your list of manuals

Page 37 highlights

AXIS Q1765-LE Network Camera Events - System Ready - Trigger the rule when the product has been started and all services are running. This can for example be used to send a notification when the product restarts. • Time - Recurrence - Trigger the rule periodically. See Recurrences, on page 39. This can for example be used to upload an image every 5 minutes. - Use Schedule - Trigger the rule according to the selected schedule. See Schedules, on page 39. Available actions include: • IR Illumination - Activate or deactivate IR light. • Day/Night Vision Mode - Set day mode (IR cut filter on) or night mode (IR cut filter off). • Output Port - Activate an I/O port to control an external device. • Play Audio Clip - See Audio Clips, on page 25. • PTZ Control - Preset Position - Go to a preset position. • Record Video - Record video to a selected storage. • Send Images - Send images to a recipient. • Send Notifications - Send a notification message to a recipient. • Status LED - Flash the LED indicator. This can for example be used to validate triggers such as motion detection during product installation and configuration. Setting Up an Action Rule An action rule defines the conditions that must be met for the product to perform an action, for example record video or send an email notification. If multiple conditions are defined, all of them must be met to trigger the action. The following example describes how to set up an action rule to record video to a network share if there is movement in the camera's field of view. Set up motion detection and add a network share: 1. Go to Detectors > Motion Detection and configure a motion detection window. See page 32 2. Go to System Options > Storage and set up the network share. See page 51. Set up the action rule: 1. Go to Events > Action Rules and click Add. 2. Select Enable rule and enter a descriptive name for the rule. 3. Select Detectors from the Trigger drop-down list. 4. Select Motion Detection from the drop-down list. Select the motion detection window to use. 5. Optionally, select a Schedule and Additional conditions. See below. 6. Under Actions, select Record Video from the Type drop-down list. 7. Select a Stream profile and configure the Duration settings as described below. 8. Select Network Share from the Storage drop-down list. 37

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
AXIS Q1765–LE Network Camera
Events
-
System Ready
– Trigger the rule when the product has been started and all services are running. This can for
example be used to send a notification when the product restarts.
•
Time
-
Recurrence
– Trigger the rule periodically. See
Recurrences, on page 39
. This can for example be used to
upload an image every 5 minutes.
-
Use Schedule
– Trigger the rule according to the selected schedule. See
Schedules, on page 39
.
Available
actions
include:
•
IR Illumination
– Activate or deactivate IR light.
•
Day/Night Vision Mode
– Set day mode (IR cut filter on) or night mode (IR cut filter off).
•
Output Port
– Activate an I/O port to control an external device.
•
Play Audio Clip
– See
Audio Clips, on page 25
.
•
PTZ Control
-
Preset Position
– Go to a preset position.
•
Record Video
– Record video to a selected storage.
•
Send Images
– Send images to a recipient.
•
Send Notifications
– Send a notification message to a recipient.
•
Status LED
– Flash the LED indicator. This can for example be used to validate triggers such as motion detection during
product installation and configuration.
Setting Up an Action Rule
An action rule defines the conditions that must be met for the product to perform an action, for example record video or send an
email notification. If multiple conditions are defined, all of them must be met to trigger the action.
The following example describes how to set up an action rule to record video to a network share if there is movement in the
camera’s field of view.
Set up motion detection and add a network share:
1.
Go to
Detectors > Motion Detection
and configure a motion detection window. See
page 32
2.
Go to
System Options > Storage
and set up the network share. See
page 51
.
Set up the action rule:
1.
Go to
Events
>
Action Rules
and click
Add
.
2.
Select
Enable rule
and enter a descriptive name for the rule.
3.
Select
Detectors
from the
Trigger
drop-down list.
4.
Select
Motion Detection
from the drop-down list. Select the motion detection window to use.
5.
Optionally, select a
Schedule
and
Additional conditions
. See below.
6.
Under
Actions
, select
Record Video
from the
Type
drop-down list.
7.
Select a
Stream profile
and configure the
Duration
settings as described below.
8.
Select Network Share from the
Storage
drop-down list.
37