Belkin F1DP108A User Manual - Page 16

section Installation Mounting the SMB CAT5 KVM Switch 1 Bracket Installation (F1DP108Aea and F1DP116Aea) 2 Eight- or 16-Port SMB CAT5 KVM Switches include adjustable mounting brackets ideal for installation in 19-inch racks. The mounting brackets feature 3 three adjustment positions to allow you to set the SMB CAT5 KVM Switch's face flush with the ends of the rails or to extend the SMB CAT5 KVM Switch past the front of the rails. Please follow these simple steps to achieve the 4 desired adjustment. Step 1 5 Determine how far you would like the SMB CAT5 KVM Switch to protrude from the rack. Select a bracket-hole scheme. 6 Step 2 Attach the bracket to the side of your SMB CAT5 KVM Switch using the Phillips screws provided. (Refer to diagram below.) 7 8 Step 3 Mount the SMB CAT5 KVM Switch to the rack-rail assembly. (Refer to diagram below.) NOTE: If this SMB CAT5 KVM Switch will be daisy-chained to another KVM switch, set the BANK address prior to installing on a rack. Refer to the section in this User Manual labeled "Connecting Multiple SMB CAT5 KVM Switches (Daisy-Chaining)". Your SMB CAT5 KVM Switch is now mounted securely into the bracket and you are ready to connect the console. 13