Belkin F1DP108A User Manual - Page 47
of the SMB CAT5 KVM Switch.
UPC - 722868564004
View all Belkin F1DP108A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 47 highlights
Troubleshooting The server does not detect a keyboard and I get a keyboard error reported at boot-up. • Check that the keyboard cable on the Server Interface Module is completely connected to your server. Tighten any loose connections. • If you are using the keyboard software that was included with your keyboard, uninstall it and then reinstall the standard Microsoft keyboard driver. The mouse is lost when I switch to a different port. • Check that the mouse you are using is connected properly to the console port of the SMB CAT5 KVM Switch. • Check that the mouse cable on the Server Interface Module is completely connected to your server. Tighten any loose connections. • If you are using a mouse driver that was included with your mouse, uninstall it and install the standard Microsoft mouse driver. • Make sure the mouse works when directly plugged into the server. • If the server is coming out of standby mode, allow up to one minute to regain mouse function. • De-activate power-management schemes on the PC with which you are experiencing problems. • Try a different mouse. The mouse is not detected at boot-up. • Check the cables and make sure that they are inserted correctly. The server boots up, but the mouse does not work. • Make sure the mouse is plugged in properly. • Make sure the mouse works when directly plugged into the server. Rebooting may be necessary when trying this. • Try a different mouse. 44