Belkin F1DP108A User Manual - Page 24
Connecting Servers to the SMB CAT5 KVM Switch, Sun Server with MiniDIN8 Connection
UPC - 722868564004
View all Belkin F1DP108A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
section Installation Connecting Servers to the SMB CAT5 KVM Switch 1 (Sun Server with MiniDIN8 Connection): 2 Step 1 Make sure your server is powered off. 3 Step 2 Using the Belkin OmniView SMB Server Interface Module for Legacy Sun 4 (F1DP101AeaAL), connect the VGA connector to the monitor port on your server. (Refer to diagram below.) 5 6 7 8 Step 3 Connect the miniDIN8 connector to the miniDIN8 keyboard port on the server. (Refer to diagram below.) 21
21
1
2
3
4
5
6
7
8
section
Installation
Connecting Servers to the SMB CAT5 KVM Switch
(Sun Server with MiniDIN8 Connection):
Step 1
Make sure your server is powered off.
Step 2
Using the Belkin OmniView SMB Server Interface Module for Legacy Sun
(F1DP101AeaAL), connect the VGA connector to the monitor port on your
server. (Refer to diagram below.)
Step 3
Connect the miniDIN8 connector to the miniDIN8 keyboard port on the
server. (Refer to diagram below.)