Beltronics RX55 Owner's Manual - Page 2

Congratulations Your new BEL Pro RX55 is the most advanced radar and laser detector available. The RX55 includes full X, K, and SuperWide Ka radar protection, front and rear laser detection, Digital Signal Processing for superior range and falsing rejection, our patented Mute and AutoMute, audible and visual band alerts, and all the performance you'd expect from Beltronics. In addition, the new BEL Pro RX55 introduces a new level of performance and innovative features. • New long-range radar performance • Multiple laser sensors for improved long-range detection • Exclusive Programming lets you instantly set 7 features • Exclusive AutoScan™ mode, plus Highway and City settings • 280 LED Text-Matrix Display for easy to read messages • Detects and decodes all Safety Radar signals • New VG-2 Alert/Auto Shutoff • Optional SmartPlug compatible If you've used a radar detector before, a review of the Quick Reference Guide on pages 4 and 5, and the Programming information on pages 12 and 13 will briefly explain the new features. If this is your first detector, please read the manual in detail to get the most out of your RX55's performance and features. Please drive safely. FCC Note: Modifications not expressly approved by the manufacturer could void the user's FCC granted authority to operate the equipment. 1 Quick Reference Card ̄ Remove card along perforations ̄ ̄ Remove card along perforations ̄ BEL Pro RX55 Quick Reference Card There are 7 user-selectable options so you can customize your RX55 for your own preferences. The buttons labeled CITY and BRT are also used to enter the Program Mode, REVIEW your current program settings, and to CHANGE any settings as desired. The words PROGRAM, RVW and CHG are located on the top of the detector. How to use Programming 1 To enter Program Mode, press and hold the CITY and BRT buttons down for 2 seconds. (The unit will beep twice, and will display the word "Program"). An example of Programming Here is how you would turn RX55's AutoMute feature off. 1 Enter the Program Mode by holding both the CITY and BRT buttons down for 2 seconds. The RX55 will beep twice and display Program. 2 Press and hold the RVW button. The RX55 will scroll through the categories, starting with Power-on indication (Pilot), then Power-on sequence (PwrOn), Voice (VoiceOn), and then AutoMute (aMute). 2 Then press the RVW button to REVIEW the current settings. (You can either tap the button to change from item to item, or hold the button to scroll through the items). 3 Press the CHG button to change any setting. (You can either tap the button to change from setting to setting, or hold the button to scroll through all the options). 3 Release the RVW button when the RX55 shows the AutoMute item. Since the factory setting is for AutoMute to be on, the RX55 will display aMute ON. (If you accidentally don't release the RVW button in time, and the RX55 goes to the next category, hold the RVW button down again, and after the RX55 scrolls through all categories, it will begin again at the top of the list.) 4 To leave Program Mode, simply wait 8 seconds without pressing any button. (The unit will display Complete, beep 4 times, and return to normal operation). Factory Default Settings To reset RX55 to its original factory settings, press and hold the "CITY" and "BRT" buttons while turning the power on. The RX55's display will provide a "Reset" message, accompanied by an audible alert, acknowledging the reset. 4 Press the CHG button to change from aMute ON to aMute OFF. 5 To complete the Programming, simply wait 8 seconds without pressing any button, or press the PWR button. The RX55 will display Complete, beep, and return to normal operation. Programming Details ̈