Beltronics RX55 Owner's Manual - Page 7
Power Connector, Signal Strength Meter - radar detector
View all Beltronics RX55 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
Controls and Features Power Connector RX55's new power jack uses a telephonetype connector. This new 6-pin connector works with the included coiled cord, and with our optional new SmartPlug. The SmartPlug is a special power cord that has a power-on indicator, a bright alert light that warns of radar or laser, and a convenient mute button right on the plug. It's the perfect addition for any car where reaching the detector mute button on the windshield is a stretch. And for discreet night driving, put the RX55 in the Dark Mode, and use the SmartPlug for your visual alerts. Other drivers won't know you have a detector. Two versions are available: A SmartPlug that plugs into your lighter socket and has a coiled cord, and a Direct-wire SmartPlug module that you wire into your electrical system, with an 8 foot straight cord to route to your RX55. For more information or to order, call us toll-free at 1-800-341-2288. Signal Strength Meter RX55's alphanumeric display consists of 280 individual LEDs, to provide an intuitive ultra-bright display of signal strength and text messages. RX55's standard bar-graph signal strength meter only displays information on a single radar signal. If there are multiple signals present, the RX55's internal computer determines which is the most important threat to show on the bar-graph meter. When RX55 detects radar, it displays the band (X, K, or Ka), and a precise bar graph of the signal strength. When RX55 detects a laser signal, the display will show "Laser." NOTE: If you are operating the RX55 in Dark mode, the display will not light when a signal is detected - only the audio alert will be heard. VG2 If the VG2 band (Radar detector detector) is turned on, VG2 units will be detected with an audible and visual alert. Once detected, the RX55's internal oscillator will shut down for a period of time, making it undetectable. The RX55's receiver will then periodically turn back on to see if the VG2 unit is still present. If not, RX55 will return to normal operation. NOTE: With VG2 detection on, other radar detectors could be detected as well. 10 11