Beltronics RX55 Owner's Manual - Page 8

Programming There are 7 user-selectable options so you can customize your RX55 for your own preferences. The buttons labeled CITY and BRT are also used to enter the Program Mode, REVIEW (RVW) your current program settings, and to CHANGE (CHG) any settings as desired. The words PROGRAM, RVW, and CHG are located on the top of the detector, and are highlighted graphically. Pages 14-16 explain each option in more detail. How to use Programming 1 To enter Program Mode, press and hold the CITY and BRT buttons down for 2 seconds. (The unit will beep, and display the word "Program"). 2 Then press the RVW button to review the current settings. (You can either tap the button to change from item to item, or hold the button to scroll through the items). 3 Press the CHG button to change any setting. (You can either tap the button to change from setting to setting, or hold the button to scroll through all the options). 4 To leave the Program Mode, simply wait 8 seconds without pressing any button, or press the PWR button. (The unit will display Complete, beep, and return to normal operation). An example Here is how you would turn RX55's AutoMute feature off. 1 Enter the Program Mode by holding both the CITY and BRT buttons down for 2 seconds. The RX55 will beep twice and display Program. 2 Then hold the RVW button down. The RX55 will scroll through the categories, starting with Pilot ( PilotHWY), then Power-on sequence (PwrOnSTD), then Voice (Voice On), and then AutoMute (aMute ). 3 Release the RVW button when RX55 shows the AutoMute item. Since the factory setting is for AutoMute to be on, RX55 will display aMute ON. (If you accidentally don't release the RVW button in time, and the RX55 goes to the next category, hold the RVW button down again, and after RX55 scrolls through all categories, it will begin again at the top of the list.) 4 Press the CHG button to change from aMute ON to aMute OFF. 5 To complete the Programming, simply wait 8 seconds without pressing any button, or press the PWR button. The RX55 will display Complete, beep, and return to normal operation. 12 Overview of Programming Press the RVW button to go from one category to the next PILOT (Power-on indication) POWER-ON SEQUENCE VOICE AUTOMUTE CITY MODE SENSITIVITY SWS VG2 (radar detector detector) Pilot HWY Pilot H Pilot V PwrOn STD PwrOn FST Voice ON Voice OFF aMute ON aMute OFF City STD City LoX City NoX SWS Off SWS On VG2 Off VG2 On Press the CHG button to change your setting within a category * Full word: Highway or AutoScan or City Letter: H or A or C Vehicle voltage * Standard power-on sequence Fast power-on sequence * Voice alerts on Voice alerts off * AutoMute on AutoMute off * Standard City mode sensitivity Low X band sensitivity in City Mode No X band sensitivity in City Mode * SWS detection off SWS detection on * VG2 detection off VG2 detection on *Factory Default Settings To reset RX55 to its original factory settings, press and hold the "CITY" and "BRT," buttons while turning the power on. The RX55's display will provide a "Reset" message, accompanied by an audible alert, acknowledging the reset. 13