Beltronics RX55 Owner's Manual - Page 9

Details of Programming Pilot (Power-on indication) Note: When you are using the Dark mode, the display will only show HD, AD, or CD, (Highway-Dark, AutoScan-Dark, or CityDark). Pilot HWY (Full description) In this setting, RX55 will display "Highway," "City," or "AutoScan" as its power-on indication. (factory default) Pilot H (Letter) In this setting, RX55 will display "H" for Highway, "C" for City, and "A" for AutoScan. Pilot V (Vehicle voltage) In this setting, the RX55 will provide "H" for Highway, "C" for City and "A" for AutoScan, and the vehicle's voltage. If the vehicle's voltage drops below 10.5 volts, a low voltage warning will be displayed, followed by an audible alert. A high voltage warning is also provided when the vehicle's voltage exceeds 16.0 volts. Power-on Sequence PwrOnSTD (Standard) In this setting, each time you turn on the RX55, it will display "BEL RX55," "Laser," "Ka-band," "K-band," "X-band," "Safety," and any changes to factory settings. (factory default) PwrOnFST (Fast power-on) In this setting, the RX55 will only provide a brief audible tone, and will display any nonfactory settings. Voice Voice On (Voice alerts on) In this setting, all radar, laser, and SWS (if programmed on) alerts will be accompanied by a digital voice. Voice Off (Voice alerts off) In this setting, only the audio tones will be heard during an alert or SWS message. AutoMute aMute On (AutoMute on) In this setting, RX55's audio alerts will initially be at the volume you set, but after a few seconds, the RX55 will automatically reduce the volume level, to keep you informed, but not annoyed. (factory default) aMuteOff (AutoMute off) With AutoMute off, RX55's audio alerts will remain at the volume you set for the duration of the radar encounter. City Mode Sensitivity City STD (Standard) In this setting, when you put RX55 in the City mode, X-band sensitivity is significantly reduced, to reduce annoyance from X-band intrusion alarms and motion sensors. (factory default) City LoX (Low X band sensitivity) In this setting, when you put RX55 in the City mode, X-band sensitivity is reduced more than the standard setting. This will reduce X band alarms from other sources even further, but also significantly reduces range to X band traffic radar. City NoX (No X band sensitivity) In this setting, when you put RX55 in the City mode, it will not respond to any X band signals. WARNING: Only choose this setting if you are absolutely certain that there are no X band traffic radar units where you drive. NOTE: These settings only apply when RX55 is operated in City mode. X-band sensitivity is not affected when used in "AutoScan," or "Highway" modes. 14 15