BenQ MP612C User Manual - Page 55

Temperature information, SYSTEM, SETUP: Advanced, Lamp Settings, ENTER, Reset Lamp Timer, Reset

Get BenQ MP612C - SVGA DLP Projector PDF manuals and user guides
UPC - 840046018771
View all BenQ MP612C manuals
Add to My Manuals
Save this manual to your list of manuals

Page 55 highlights

9. Replace the lamp cover on the projector. 10. Use a coin to turn the screw clockwise until the lamp cover is secured. • Loose screw may cause a bad connection, which could result in malfunction. • Do not over tighten the screw. 11. Restart the projector. Do not turn the power on with the lamp cover removed. 12. After the startup logo, open the On-Screen Display (OSD) menu. Go to the SYSTEM Notice SETUP: Advanced > Lamp Settings menu. Reset Lamp Timer? Press ENTER. The Lamp Settings page displays. Highlight Reset Lamp Timer. A Reset Cancel warning message displays asking if you want to reset the lamp timer. Highlight Reset and press ENTER. The lamp time will be reset to '0'. Do not reset if the lamp is not new or replaced as this could cause damage. Temperature information When the Temperature warning light is on, it is warning you of the following possible problems: 1. The internal temperature is too high. 2. The fans are not working. Turn the projector off and contact qualified service personnel for further help. For more detailed information, please refer to "Indicators" on page 56. Maintenance 55

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
Maintenance
55
11.
Restart the projector.
Do not turn the power on with the lamp cover removed.
12.
After the startup logo, open the On-Screen
Display (OSD) menu. Go to the
SYSTEM
SETUP: Advanced
>
Lamp Settings
menu.
Press
ENTER
. The
Lamp Settings
page
displays. Highlight
Reset Lamp Timer
. A
warning message displays asking if you want
to reset the lamp timer. Highlight
Reset
and
press
ENTER
. The lamp time will be reset to '0'.
Do not reset if the lamp is not new or replaced as this could cause damage.
Temperature information
When the Temperature warning light is on, it is warning you of the following possible
problems:
1.
The internal temperature is too high.
2.
The fans are not working.
Turn the projector off and contact qualified service personnel for further help. For more
detailed information, please refer to
"Indicators" on page 56
.
9.
Replace the lamp cover on the projector.
10.
Use a coin to turn the screw clockwise until the
lamp cover is secured.
•
Loose screw may cause a bad connection, which
could result in malfunction.
•
Do not over tighten the screw.
Reset Lamp Timer?
Reset
Cancel
Notice