BenQ PB9200 User Manual - Page 12
Adjusting The Projector's Elevator, Using The Lens Shift Buttons - remote control
UPC - 840046007669
View all BenQ PB9200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
PB9200-e.book Page 6 Thursday, May 27, 2004 2:15 PM Adjusting The Projector's Elevator WARNING • Do not touch about the lens and ventilation openings during use or immediately after use to prevent a burn. CAUTION • To prevent damaging the projector and injuring yourself, always hold the projector whenever using the elevator buttons to adjust the elevator feet. You can use the elevator feet to make adjustments if the surface on which you need to set the projector is uneven or if you otherwise need to adjust the angle of projection. The adjustment range of the elevator feet is 0 to 9 degrees. TEMP LAMP STANDBY/ON LENS SHIFT BNG COMPONENT S-VIDEO VIDEO INTER RGB 1. Press and hold in the elevator buttons. 2. Raise or lower the projector to the desired height and then release the elevator buttons. When you release the elevator buttons, the elevator feet will lock into position. 3. As necessary, you can also finely adjust the height of the projector by twisting the elevator feet by hand. FOCUS ZOOM Elevator buttons Elevator feet KEYSTONE SEARCH RESET MENU M1-D INPUT Using The Lens Shift Buttons The lens of this projector can be shifted vertically. When you want to finely adjust the picture position, use the LENS SHIFT buttons of the projector. LENS SHIFT LENS SHIFT buttons LASER INDICATOR STANDBY/ON VIDEO RGB ++ LENS SHIFT FOCUS -- + ZOOM - BLANK ASPECT LASER Projector Remote control 6 Setting Up