BenQ PB9200 User Manual - Page 40

PB9200-e.book Page 34 Thursday, May 27, 2004 2:15 PM NETWORK Menu This projector provides the NETWORK function. If you use this function, please set up the projector according to the Network environment in which you use it. memo If DHCP function on your Network is activated, the following operation is not normally required, because DHCP function on this projector is active as initial settings. Please see the section "Network Setting Up". MENU MAIN PICTURE-1 PICTURE-2 INPUT AUTO SCREEN OPTION NETWORK : SELECT SETUP DHCP INFORMATION RESET TURN OFF Item Description SETUP DHCP INFORMATION RESET Press the 4 (or the ENTER) button, then the IP ADDRESS menu as right comes up. memo This menu will be shown only when the DHCP is disabled at the NETWORK - SETUP IP ADRRESS 192 . 168 . 1 . 24 ESC :RETURN ENT :NEXT NETWORK menu. The IP Address is identification number of the projector on the Network. 1. Set the IP Address using the 5 / 6 buttons. memo The same IP Address with other units cannot be used. Press the 4 (or the ENTER) button at the IP ADDRESS menu, then the SUBNET MASK menu comes up. The SUB- NETWORK - SETUP SUBNET MASK 255 . 255 . 255 . 1 ESC :RETURN ENT :NEXT NET MASK is an address of the Net- work. 2. Set the address of the Network to be used. Press the 4 (or the ENTER) button at the SUBNET MASK menu, then the DEFAULT GATEWAY menu comes up. The DEFAULT GATEWAY NETWORK - SETUP DEFAULT GATEWAY 255 . 255 . 255 . 0 ESC :RETURN ENT :NEXT is the main device to access outside of the Network. 3. Set the address of the device as gateway to an outer Network. Select the TURN ON or the TURN OFF using the 5 / 6 buttons. : TURN ON TURN OFF If your Network doesnt support the DHCP function, select the TURN OFF. NETWORK DHCP TURN ON TURN OFF Pressing the 4 (or the ENTER) button displays the INFORMATION menu. The menu shows the information about the current Network setting as illustrated right. NETWORK-INFORMATION IP ADRRESS 192. 168. 1. 24 SUBNETMASK 255. 255. 255. 0 DEFAULT GATEWAY 255. 255. 255. 0 MAC ADRRESS 00. E0. 47. 03. 0C. D8 Select the EXECUTE using the 5 button to reset the NETWORK menu items. : EXECUTE CANCEL All items on the NETWORK menu are returned to the initial setting. 34 Multifunctional Settings