BenQ PB9200 User Manual - Page 43

Replacing The Lamp - mount

Get BenQ PB9200 - XGA LCD Projector PDF manuals and user guides
UPC - 840046007669
View all BenQ PB9200 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 43 highlights

PB9200-e.book Page 37 Thursday, May 27, 2004 2:15 PM Replacing The Lamp If the indicators or a message prompts you to replace the lamp, replace the lamp as soon as possible. 1. Turn off the projector, and unplug the power cord. Allow the lamp bulb to cool for at least 45 minutes. 2. Contact your dealer to prepare a new lamp. Tell the dealer your lamp type number. If the projector is mounted on the ceiling, or if the lamp has broken, also ask the dealer to replace the lamp. In the case of replacement by yourself, 3. After making sure that the projector has Lamp cover knob cooled adequately, slide the knob of a lamp cover lock as shown in the Figure. Then, one side of the lamp cover is raised. Pull up the lamp cover and remove it, as shown in the Figure. FOCUS ZOOM TEMP LAMP RESET MENU KEYSTONE SEARCH M1-D INPUT RGB INTER VIDEO STANDBY/ON BNG COMPONENT S-VIDEO Lamp cover PC CO LAMP LENS SHIFT VIDEO STANDBY/ON COMPONENT S-VIDEO INTER LENS SHIFT BNG M1-D INPUT RGB KEYSTONE SEARCH 4. Unscrew the 3 screws, and slowly pull out the lamp by the handle. Be careful Screws TEMP LAMP not to touch the inside of the lamp case. MENU RESET FOCUS ZOOM 5. Insert the new lamp, and tighten the 3 screws firmly to lock it in place. PC PC 6. Interlocking the 2 tabs of the lamp cover CO LAMP CO LAMP to the projector, put the lamp cover on the projector. Then push the point of the TEMP LAMP lamp cover to fix it, as shown in the Fig- Tabs MENU RESET FOCUS ZOOM ure. Make sure that the lamp cover does't come up. PC CO LAMP 7. Turn on the projector, and reset the lamp timer. (1) While the projector running, press the MENU button to open the menu. VIDEO STANDBY/ON COMPONENT S-VIDEO INTER LENS SHIFT BNG M1-D INPUT RGB KEYSTONE SEARCH (2) Choose the "OPTION" on the menu using the 5 / 6 button, then press the button or ENTER button. (3) Choose the "LAMP TIME" using the 5 / 6 button, then press and hold the RESET button for 3 seconds. (4) Choose the "RESET" using the 5 button. memo When the lamp has been replaced after the message of "THE POWER WILL TURN OFF AFTER 0hr." is displayed, complete this operation within 10 minutes of switching power on. memo Incorrectly resetting of the lamp timer (resetting without replacement, or neglect of resetting after replacement) will result in incorrect message functions. Lamp 37

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
Lamp
37
Replacing The Lamp
If the indicators or a message prompts you to replace the lamp, replace the lamp as soon as
possible.
1.
Turn off the projector, and unplug the power cord. Allow the lamp bulb to cool for at
least 45 minutes.
2.
Contact your dealer to prepare a new lamp. Tell the dealer your lamp type number. If
the projector is mounted on the ceiling, or if the lamp has broken, also ask the dealer
to replace the lamp.
In the case of replacement by yourself,
3.
After making sure that the projector has
cooled adequately, slide the knob of a
lamp cover lock as shown in the Figure.
Then, one side of the lamp cover is
raised. Pull up the lamp cover and
remove it, as shown in the Figure.
4.
Unscrew the 3 screws, and slowly pull
out the lamp by the handle. Be careful
not to touch the inside of the lamp case.
5.
Insert the new lamp, and tighten the 3
screws firmly to lock it in place.
6.
Interlocking the 2 tabs of the lamp cover
to the projector, put the lamp cover on
the projector. Then push the point of the
lamp cover to fix it, as shown in the Fig-
ure. Make sure that the lamp cover does’t
come up.
7.
Turn on the projector, and reset the lamp
timer.
(1) While the projector running, press the
MENU button to open the menu.
(2) Choose the “OPTION” on the menu using the
5
/
6
button, then press the button
or ENTER button.
(3) Choose the “LAMP TIME” using the
5
/
6
button, then press and hold the RESET
button for 3 seconds.
(4) Choose the “RESET” using the
5
button.
memo
When the lamp has been replaced after the message of "THE POWER WILL
TURN OFF AFTER 0hr." is displayed, complete this operation within 10 minutes of
switching power on.
memo
Incorrectly resetting of the lamp timer (resetting without replacement, or
neglect of resetting after replacement) will result in incorrect message functions.
Lamp cover
knob
Lamp cover
CO LAMP
PC
Tabs
Screws
PB9200-e.book
Page 37
Thursday, May 27, 2004
2:15 PM