BenQ PB9200 User Manual - Page 22

PB9200-e.book Page 16 Thursday, May 27, 2004 2:15 PM Selecting The Aspect Ratio 1. Press the Aspect button to toggle between the modes for aspect ratio. ■ At a M1-D signal NORMAL 4:3 16:9 memo NORMAL keeps the original aspect ratio of the input signal. ■ At a RGB signal (not M1-D) 4:3 16:9 ■ At a video signal / no signal 4:3 16:9 SMALL LASER INDICATOR STANDBY/ON VIDEO RGB +++ LENS SHIFT FOCUS ZOOM --- BLANK ASPECT LASER PREVIOUS NEXT MOUSE ESC MENU POSITION RESET AUTO MAGNFY PinP VOLUME ON FREEZE MUTE OFF KEYSTONE SEARCH 1 2 3 ID CHANGE ASPECT button memo At a HDTV signal of 1125i or 750p, only 16:9 can be selected. Using The Automatic Adjustment Feature memo The automatic adjustment operation requires approximately 10 seconds. Also, please note that it may not function correctly with some input. 1. Press the AUTO button. ■ At a RGB signal The Vertical position (V POSITION), the horizontal position (H POSITION), the clock phase (H PHASE) and horizontal size (H SIZE) will be automatically adjusted. LASER INDICATOR STANDBY/ON VIDEO RGB ++ LENS SHIFT FOCUS -- + ZOOM - BLANK ASPECT LASER memo Make sure that the application window is set to its maximum size prior to attempting to use this feature. Dark pictures may still be incorrectly adjusted. Use a bright screen when adjusting. ■ At a video signal The signal type mode best suited for the respective input signal will be selected automatically. PREVIOUS NEXT MOUSE ESC MENU POSITION RESET AUTO MAGNFY PinP VOLUME ON FREEZE MUTE OFF KEYSTONE SEARCH 1 2 3 ID CHANGE AUTO button memo This function is available only when the AUTO is selected to the item VIDEO of the INPUT menu. For a component video signal, the signal type is identified automatically independently of this function. 16 Operating