Bernina 1260 Manual - Page 48

Maintenance: Cleaning and Oiling ,eatisio 4•1 •• I 4 tk If the machine is stored in a cold room. rt shoLid be brought to a warm mom approximately one bar before use, to romps the oil in the baengs 10 a ituct slate. To oil the hook: Apply 1-2 drops of oil after 3-4 hours sowing. To clean and oil the hook Cleaning Mien seeing. pieces a mread we collect under the stitch plate end around the hook. These remnants rnust be rem wad at regular intervals. Dsconneci the sewing machine from the po. wet saPPIY by puling out the plug from the socket. - Remove the presser loot and Inc needle. - Open the hinged !font cover on the free arm - Lower he feect-d0g. Set knob 18 to pose ton Mg. LAN both thumbs. press the stitch plate up anti back - Ottani the Iced-clog and undersde cil the stitch plate. - To relit the stitch prate on the free arm. MCA the stitch plate apt' the rear. push forwaro until it engages (fig. 2). WARNING: Please rote,' ..c• the safety ristructiors Disconnect the sewing machine from the power supply by pulling out the plug from the socket. - Take cut the bobbin case, see page Wan the thumb of the loll hand. press the lower release ley& to me len eg.3). - Fold down the serm SObweal looking strap with the back hook race cover. - Take cut the nook. - Clean tne top and bot- tom of the hook me with a Snarl and cotton cloth. Never use a scriewctriver of schism etc. to remove remnants cl thread. - Lightly al the hook race with l-2 drops of oil ffig. 41. - Insert the 1100k II necessary, urn with the hallaYillOet until the hook rinser a on the on pg. 51. - dose the brad, hook race cover and locking seep The pawl mica engage. - Cneck by tiering the nandwhool. - Insert the bobbin Satre Ind