Bernina 2000 Manual - Page 22

Practical sewing 42 E Sewing circular or tubular items e S - Cut away a small section - Raise the tip of the pres- (approx. 2.5 cm/1") of ser foot. the seam allowance. - Turn work away from - Raise the needles (Needle stop*). you and sew off the edge. e s - Raise the presser foot. - Remove the cloth plate to expose the free arm (if wanted). e 9 - Position the fabric under the presser foot so that the edge of the cut is against the knife. E 9 E - Lower the presser foot. - Sew. - When the seam is complete, sew a few stitches over the previous stitches without cutting. Unpicking seams Method 1: Cut the loops formed by the looper threads with sharp scissors or the Bernina seam ripper. Pull gently on the threads and the seam will come undone. E 9 t 9 t s t E E E E Method 2: Loosen the loops formed by the needle threads with a pin or your Bernina seam E ripper. Pull first on the needle and then on the looper threads and the seam will come undone. Maintenance Replacing the upper knife 44 Replacing the lower knife 44 Replacing the bulb 44 Cleaning and oiling 44 Trouble shooting guide 7 43